roofing contractors | Infinite Roofing & Construction Roofing Blog

Best Time for Roof Installation?

October 25, 2019 by Infinite Roofing Leave a Comment

Typically, asphalt roof shingles should be installed between 50 degrees and 80 degrees Fahrenheit. Even high quality asphalt shingles can crack when hammered, and when installing in the wrong temperature can cause breakage. This is one of the biggest problems when you install asphalt roof shingles when it’s under 50 degrees (no lower than 45 degrees). With that said, winter is often a great time to get a good deal on a new roof but your local roofing contractor will need to wait until the temperature is in the right range before scheduling an installation date.

Routine roof maintenance and periodic replacement by your roofing contractor are important for maintaining the structural integrity of your home. Your roof defends your structure from the elements and keeps you and your family safe. Leaks and poor construction can cause severe damage, including improperly-channeled water runoff that erodes the foundation of your home, water ponding on the roof that can cause sagging and leaks, and even paint damage to the exterior walls of your home.

Whether you require minor roof repairs and/or a complete roof replacement, the question is, which season is best to make the call to your local roof installation and repair contracting company?

The best time of the year to have your local roofing contractor install your new roof may not be what you think. Let’s try to determine the best season!

Winter

Snow, ice, and sleet in the winter months make it difficult to have roof work done—especially a complete roof replacement. In the frigid Northeast, (like here in Albany, NY) sealants will not adhere as effectively during winter, and roofing shingles will take much longer to set. For this reason, most roofing contractors will recommend that you wait until the temperature rises to have roof work done, unless it’s an emergency situation that you will not want to run into.

Spring/Summer

Although there might be a fair amount of rain during the spring and summer months, overall the weather is typically better during these seasons. Your local roofing contractor will agree that weather is of course a huge consideration when it comes to roof work. Spring and early summer are typically the most cost-effective times to have your roof repaired or replaced, as it is generally a slower season for local roofing companies, and materials and labor costs tend to be lower. Most local roofing companies tend to pick up later into summer, so then you may have to wait a few weeks or a month to get a roofing contractor out to your home. Please be mindful that temperatures and humidity levels may soar in late summer, which could limit the amount of time workers can spend each day on the job and possibly add several days to the project.

Autumn

Most local roofing contractors will say Autumn is ideal to have roof work done. The weather is not severely hot or humid, and the heavy downpours of rain have not yet begun. Roofing contractors can work full days on your roof without the threat of heat exhaustion or freezing. This means they can get the job done much more quickly, limiting the inconvenience to you and your family. Another benefit of installing a roof in the fall is the impact on the roofing materials. I particular, shingle roofs need time to seal and create an airtight barrier. Frigid temperatures in the winter months or heat and humidity in the summer make this process more difficult. Autumn can be thought of as the “Goldilocks” season: Not too hot, not too cold, it is just right. Having roof work done in the fall also eliminates any additional stress. You would not have to worry about whether your roof will make it through another winter season without major issues.

Is Replacement needed?

Your local roofing contractors will agree that a very common error homeowners make is putting off their roof replacement even when it’s long overdue and there are already signs of problems. As mentioned earlier, a major leak or storm could cause severe damage to other parts of your home and creating a big financial mess. Roof replacement is a notable expense, but also a significant investment in your home. Roof Replacement helps preventing secondary damage, it adds to your property value, and provides you with peace of mind. Replacing your roof before an emergency arises allows you the time to research your local roofing companies and make an informed decision. Please do not wait until it’s an emergency to have your roof repaired or replaced! Planning ahead is always the best choice.

Roofing Safety: Roof Safety Tips

September 13, 2019 by Infinite Roofing Leave a Comment

Roofing Safety Tips — Infinite Roofing and Construction

Based on OSHA’s fall prevention campaign, they summarize the proper roofing safety practices as “Plan, Provide and Train”, which is something that Infinite Roofing provides to all our work crews. This simply means:

Plan – In order to get the job done properly, roofing contractors need a roof safety plan for each worksite, making sure that they have the proper equipment, material and having the appropriately trained workers. Also, the contractors knowing the pitch of the roof and following the appropriate procedure for a low or steep slope roof. Doing this provides a better and thorough roofing safety plan.
Provide – Roofing Contractors must be trained to have the right pieces of equipment, such as the types of ladders, scaffolds, and safety gear.
Train – Roofers must be trained on how to use each equipment that is used for the job. They must be trained in hazard recognition as well as the care and safety of ladders, scaffolds and other equipment that they will be using on the job.

Fall Protection Requirements

Falls are very common when it comes to roofing, they are a leading cause of work-related injuries and deaths to the workers. When a roofer is working six feet or above, this puts each roofer at risk of serious injury or even death if they were to fall. When it comes to Infinite Roofing we focus on those dangers and make sure that we avoid the lack of fall protection or the improper setup that will increase their risk of falling from a height.

Fall Protection Training

Commercial roofing contractors must provide fall protection training for all workers who would be exposed to the chances of falling. The training must be conducted by a person who is competent and has good knowledge within the roofing industry. The information that would be provided should include information on how to recognize fall hazards and the procedures to follow in order to minimize the chances of serious incidents occurring. As a professional roofing contractor, Infinite Roofing always ensures that all our workers follow all steps to ensure they stay safe.

Roofing Safety Practice and Equipment

The best commercial roofing company to hire is one that focuses on safety and is aware of the following:

Ladder Safety & Placement: An experienced Albany roofer will have the proper ladder lengths so that it could be placed against the house at a safe angle. They would also make sure that the ladders are inspected by a competent person for any visible defects on a regular basis. They would take extra care that all footing of the ladder is secured and that the top is tied to prevent any slipping or shifting.
Safety Equipment: Other safety equipment should be used when it comes to roofing, such as using a guardrail system, scaffolding, and fall arrest systems that would include anchorage, safety harnesses and safety lines.
Safety Practices: In the demolition phase, roofing contractors should always protect their workers on the ground from falling debris by controlling how it leaves the roof. According to OSHA, wearing appropriate footwear is a piece of important protective equipment and critical during roof demolition. Workers should also be careful with air hoses and power cords when using nail guns and other electrical equipment.
Training: Roofing is a trained skill that also requires experience to fully master. Therefore, a good contractor will make sure that all their workers have been fully trained in each practice and are completely up to date with any new safety guidelines and standards. The employers must appoint a qualified person to train workers. They need to be provided with ongoing safety training that focuses on that specific type of worksite as well as general roofing safety training. Employers must also appoint a competent person to train workers who construct, disassemble, repair, inspect scaffolds to recognize any potential hazards. Training should also be provided in a language that the workers being trained can understand.

Roofer Tool Safety

When roofing it all comes down to the tools that you are using, therefore, power tools and equipment that is used can be extremely hazardous and can cause severe injuries if used incorrectly. Furthermore, employers can reduce the risk of injuries by simply providing the correct tool guards and trained workers. Which makes a huge improvement in the roofing safety plan.

Power tools such as nail guns, saws, etc. should have the proper shields, guards, or safety attachments that are specified by the manufacturer. Employers must also ensure that each worker using power tools is wearing appropriate eye protection. Therefore, every local roofing contractor should replace a tool guard that is missing or has been damaged in order to provide safety for their workers.

All workers must be able to properly use each tool and that they are properly trained. It is very important to discuss tool safety features, safe operating procedures, and work practices, such as proper body placement. Roofers in Albany must ensure all procedures are carefully followed when it comes down to each tool that is used.

Personal Protective Equipment

With any construction job, every local roofing contractor has a duty to protect its workers from hazards and injuries. However, where the hazard cannot be eliminated by other types of controls such as engineering or administrative controls, the local roofing contractor must ensure that workers wear the appropriate PPE.

The typical PPE used with various roofing tools and equipment is nail guns, generator/air compressor, shingle stripper, tin snips, power saw, etc.

Nail Guns: When using a nail gun, workers must wear protection (particularly eye protection), in order to prevent the nail gun from causing severe, irreparable injury. Also, always avoid carrying it against the body or with a finger on the trigger.
Generator/air compressor: It’s important to wear eye protection and other protection while working near any pressurized equipment.
Shingle Stripper: Always make sure you’re wearing the proper footwear and eye protection.
Tin snips: It’s extremely important to wear work gloves and safety glasses when discarding waste or any scrap metal.
Power saw: Making sure you’re wearing hearing protection, eye protection, and work gloves. Ensuring that guards are placed and functioning properly.

Weather Conditions

During the fall and winter time weather conditions can become very hazardous. Especially when it comes to the high winds, wet weather, and icy conditions. Roofing safety plans become importance at that point. Therefore local roofing contractors should consider suspending any operations in bad weather. Mainly when working on any type of roofing surface that could be slippery when it’s wet, which includes slate, tile, metal roofs. Furthermore, as local roofing contractors, we always do our utmost to promote safety and avoid working in serious weather conditions.

Why is a Fall protection Harness Important?

In order to prevent any falls, using a fall protection harness is the way to go. As mentioned before, falling while working on any roof is one of the most common reasons for roofer injuries. Therefore, when a harness is being used it is carefully engineered to work alongside the lanyard, rope-grab, rope, and roof anchor. Roofers in Albany, such as Infinite Roofing, always make sure that all our workers wear the right equipment, especially harnesses to prevent any serious injuries.

Safe Debris Disposal

All local roofing contractors must consider worker and bystander safety when it comes to selecting a method for handling debris, which is scattered pieces of remains or waste. A common cause of debris from a roof is the removal of old roof shingles before working on a new roof installation. When debris is not managed properly it can result in a trip hazard and contribute to falls. An effective method that professional roofing contractors can use to manage the remains or waste that is on the roof is to use a forklift to raise a collection box to roof level. Therefore, when the box is full, or when the job is completely done, the box would be lowered to the ground without any of the contractors being put at risk. Another common method is to thoroughly cordon off the area where the work is taking place to ensure that nobody wanders into a dangerous area by mistake.

To sum it up

Knowing all safety guidelines and procedures can be very involved and it is very important that local roofing contractors know all safety requirements before they hit that roof. Being properly trained, forming a roof safety plan and knowing what makes each worker safe will make a hazardous job so much safer!

Tips: End Of Summer Roof Maintenance!

August 9, 2019 by Infinite Roofing Leave a Comment

As summer slowly comes to an end and the blazing hot sun is in full gear. Many homeowners are engaging in as many outdoor activities as they can. Like going to the beach, relaxing on their back patio, or grabbing some propane to spark the grill. Hardly anyone is thinking about climbing up a ladder to check in on their roof. During the winter months, the roof has protected you from cold and wet temperatures and now it’s time to for a little roof pampering.

A majority of homeowners believe Fall is the best time to call their local Roofing Contractor to take care of the roof, but roof maintenance is a year-round activity. Summertime is the best time to start as any. Summer brings a bit of challenging weather conditions, including high temperatures, humidity, torrential rain, thunderstorms, and heavy winds.

Taking time to perform a quick evaluation assures your roof can withstand summer heat and storms, is in good operating condition, and maintaining the structural integrity of your home. Just like any other part of the house, the roof requires regular maintenance to keep it functional. Though in theory, you can inspect your shingles from the ground with a pair of binoculars, maintenance should be up close and personal. Please do not hesitate to contact your local roofing contractor. Should you require a local roofing company, Infinite Roofing is here to help!

Should you decide to tackle this by yourself, please be sure you are following the safety tips listed:

Always use proper safety equipment such as a sturdy ladder, a hard hat, eye and face protection, and a harness.
It would not hurt to bring another person along as a precaution.
Be sure you are aware of where you are stepping to avoid an unwanted accident and/or roof damage.

To get you started, here are few roof maintenance tips to help this summer:

1. Gutters and downspouts cleaning. Water always finds its way, so clearing any debris that could potentially clog gutters and downspouts is essential to roof maintenance. Preventing water from flowing to places where it shouldn’t prevent damage to substructures beneath the shingles and under the foundation

2. Trim away overhanging branches. Tree branches that hang over the roof offer a highway to heaven–or a warm, dry home– for small birds, squirrels, and other rodents you may not want living in your home. Tree limbs and branches are a common cause of roof damage but can be easily prevented by trimming away any large tree branches that could snap due to the wind, heavy ice or snow or even disease and decay. During the warmer months, you will notice more debris on the roof from leaves and dust from small branches and pine needles. Prompt bris removal is critical for a long-lasting roofing system.

3. Moss Removal. While trees may provide shade when you want to relax out front on a hot summer day, shade also means added moisture. A roof that does not get much sunlight in the rainy months is also at risk of moss growth. Be sure your local roofing contractor monitors your shingles for signs of moss, mold, or mildew growth and remove it immediately if spotted. Some moss killers may cause discoloration and/or damage roofing materials. Roofing contractors will guarantee the use of safe chemical moss killers.

4. Replacing damaged and/or missing shingles. Most roofing contractors agree that a roof can last between 15-20 years. It also depends on if the old roof was removed and there is only one layer of shingles, and if it’s ventilated properly. Keep in mind, if a roofing contractor has installed a roof over an existing layer or several layers, and it is older than 15 years, chances are you’ll most likely need a new roof. Shingles that are buckling or curled are another sign that you may need a new roof.

5. Repair broken flashing and damaged seals. Sealing and flashing are essential components in your home’s battle against moisture. If there is any penetration through the roof, there is the probability that the flashing and seal directing water away from the hole will fail. Check roof penetrations and repair leaks immediately to prevent further damage. Your local roofing contractor can help you determine the state of your flashing and sealing and can advise you as to whether or not repair or replacement is needed.

6. Blocking animals from entering the home. Four-legged pests such as rats, raccoons, and squirrels will gladly accept an invitation to move into your attic, ruin insulation with urine and feces and/or chew through electrical cords and cables. Use an industrial cloth or any other means to block access through roof vents and other openings.

To Sum It Up!

End of maintenance can be a bit intimidating, especially for new homeowners so if you’re unsure of what to do or just don’t have the time to inspect your roof yourself, make arrangements for your local roofing contractor. They can help you spot problems before they develop into costly repairs!

Roof Decking: Rotting & Corrosion

July 18, 2019 by Infinite Roofing Leave a Comment

Owning a home is one of the most challenging, yet rewarding responsibilities a person can have. You get the chance to establish a sanctuary for you and your family that provides the protection and comfort you desire. However, this can all be put at risk when you begin to notice issues with your roof such as a couple of wet spots on your ceiling. This may be your first home and may have never even looked at a roof’s foundation before let alone knowing where to begin. You go up to your attic to investigate, and come upon a distinct musty smell of mold. Signs would point to a roof leak, and one of the main causes usually would be roof rotting or roof corrosion if you own a metal roof. What do you do? You may not be an expert in roof contracting, but that is why certified experts like us at Infinite Roofing are here to help you get back to living with the protection and comfort you deserve.

What is Roof Decking?

When talking about roof rotting, we are talking about the roof decking or sheathing of the home. The roof decking plays a pivotal role in determining the safety and structural integrity of your roof.

Roof decking is the foundation of your roofing system. It is the base layer that connects the roof to the home. The roof deck is placed between the structural components, such as the trusses and joists, and the insulation/weatherproofing layers. When it comes to your roof rotting, you want to take all the steps necessary to ensure the health of your

Roof Decking Materials

Roof deck materials come as 4 x 8 sheets in a variety of different material options. The most common type of roof deck material is plywood, which comes as either OSB (Oriented Strand Board) or CDX (C to D Exposed). Other roof decking materials include steel, concrete, and cement. The main determinant of the type of material you should use is based on the amount of weight that the roof deck will need to carry, plus the weight of air conditioning equipment, rain and snow. For most residential projects the common choice of roof deck materials are OSB or CDX plywood. For commercial projects, steel, concrete, and cement are more commonly found in the roof deck. These materials are definitely interchangeable depending on your project requirements, however for now let us focus on three main materials; OSB, CDX, and steel.

OSB Plywood

OSB (Oriented Strand Board) was originated in the late 1970s as an extended use of waferboards. It separates itself from other wood-scrap materials because the long strips of wood are placed strategically instead of randomly, hence the name “oriented” because the wood strips are oriented strategically to improve the strength qualities from the waferboard. OSB Plywood is made from heat-cured adhesives and rectangular-shaped wood strands that are arranged in cross-oriented layers. Because OSB uses small wood strands for production, it is considerably less expensive than standard plywood. When produced in large, continuous sheets, the OSB is a sold-panel of consistent quality with a few voids or gaps. OSB Plywood is more susceptible to absorbing moisture and swelling up than CDX, due to the release of compaction stress in OSB created during the pressing of wood chips into the panels. Swollen OSB will remain permanent, to a degree, causing leaks, increasing decay, and creating uplift of whatever materials lie above.

CDX Plywood

CDX (Class C to D Exposed) Plywood is the lowest class of plywood and is often used in the construction industry or as a base to create other materials. Plywood is made from thin layers of wood that are peeled from a spinning log, called veneers, that are cross-laminated and glued together with a hot press. Throughout the thickness of the sheet, the grain of each layer is laid perpendicular to the adjacent layer. The final product is an odd number of layers so that the balance is maintained around the center. Since CDX is made from whole layers of logs as opposed to small strands, the plywood is much more consistent and has a less rough appearance than OSB. CDX is lighter than OSB, retains nails and screws better than OSB, and produces less swelling when exposed to water and will return to its normal thickness after drying. This feature alone is enough for roofing contractors to prefer using CDX Plywood over OSB for their roof sheathing.

Steel

Steel or Metal Roof Decks have been around since the 1930s/40s. The Steel Deck Institute (SDI) has been the biggest force in setting the standard when it comes to the design, manufacture, quality control and construction practices applied to cold-formed steel decking. The steel deck is roll-formed from structural quality sheet steel and is made to span over the roof joists or purlins to provide a flat surface to apply the weatherproof roofing. The variations in its thickness, shape, and depth can be used to meet the variety of loading requirements and spans. The steel deck’s versatility also allows for it to be used in more unusual configurations that may be sloped or curved. Steel decks are usually more costly than materials like plywood however, they provide increased longevity, durability, and a better strength-to-weight ratio backed by years of proven satisfaction in the roofing industry. Steel decks are more commonly used for flat roofing systems, which are typically used for commercial roofing projects.

How Can I Tell When My Roof Is Rotting/Corroding?

As a homeowner, you want to do anything that you can to keep your home safe from the elements of mother nature. Your first line of defense is your roof, so how can you tell when your front line is starting to deteriorate?

First things first, is it even safe for you to check your roof? We do not recommend grabbing a ladder and going on your roof to do an inspection. According to the American Association of Orthopaedic Surgeons, last year there were about 500,000 ladder-related injuries due mainly to homeowners trying to clean out their gutters or perform their own roof inspections/repairs. Our team of certified roofing contractors have specific equipment and years of experience in doing roof inspections safely and thoroughly and will provide a free, no-obligation estimate for any repairs or replacements needed.

With that being said, there still are some telltale signs that you as the homeowner can check for yourself to see if an estimate would be needed.

Roof Rotting

Here is a list of signs that your roof deck may be damaged or rotting:

Shingles curling, cracking, or buckling
Missing shingles
Holes in the roof
Mold or mildew in the attic
Spongy feel when walking on the roof
Granular wear to shingles
Damage around chimneys, pipes, and other penetrations to the structure.
Wet spots on your ceiling
Sudden increase in electric bill

There are some DIY inspections that you as a homeowner can do to find the beginning signs of roof deck damage.

Attic Inspection: Carefully make your way up to your attic and check for any signs of rotting wood. Do you see any signs of staining or moisture on any of the plywood or insulation? Can you feel any dampness in the wood? Is there a musty mold smell lingering? Can you find any holes, possibly made by a new furry neighbor? Is your attic fan and ventilation system free of dust & debris and circulating the air properly?
Ground Check: You can take a trip outside and stand in front of your home to view your roof from the outside. Are there signs of curling or missing shingles? Can you notice any sagging or structural integrity issues with your roof?
Research Roof’s Age: Severe weather or a poor ventilation system can decrease the life expectancy of your roof. If your roof is more than 20 years old, it’s a good idea to reach out for a professional roof inspection.

Roof Deck Corrosion

Roof deck corrosion occurs when using steel for your roof deck construction and has been exposed to water either from a hole created from severe weather or poor roof or insulation installation causing gaps between the roofing and insulation and allowing for water exposure.

WARNING: We do not recommend walking on a damaged metal roof structure. Corroding metal roof decking can cause structural instability which can lead to the roof collapsing if too much weight is put on the structure, leading to injury. Please refrain from having work done on units on your roof if you suspect instability in your roofing structure.

Some visible signs include:

Visible rusting in roof deck
Pieces of roof deck missing or falling from structure
Wet or damp insulation
Holes/leaks in roof

If you believe that your metal roof decking may be damaged, immediately have a professional roofing contractor, e.g. Infinite Roofing, come do a thorough and safe inspection of the roof.

So What Do I Do? Repair or Replace?

Rotted or corroded roof decks, whether made of plywood, steel or any other material, cannot be repaired and must be replaced. Contact your local certified roofing contractors and set up an appointment to have the damaged roof deck to be replaced.

Our professional roofing contractors here at Infinite Roofing would replace the rotted roof decking, along with the top of the line GAF and Versico accessory products to help prevent further roof deck rotting or corroding such as:

Lifetime Roofing Shingles
Proper Attic Ventilation
Proper Roof Deck Protection
Ice & Water Barriers
Starter Strip Shingles
Ridge Cap Shingles

Adding these top of the line products will increase the longevity and durability of your roof decking. When it comes to protecting the welfare of your home and family, you want to have the best certified roofing contractors and products out there. Here at Infinite Roofing, that is exactly what we intend to provide for you.

Metal Roofing Vs Shingles

July 5, 2019 by Infinite Roofing 2 Comments

Where you live is more than just a basic shelter. The roof can be what makes the difference between a house and a safe, secure home. A roofing system should fit the structural design, protect you from the elements, and insulate you from the cold of winter and the summer’s heat. We will discuss the difference between metal roofing systems and asphalt shingles, so you can pick which one would be a better choice for your home.

Varieties

Metal roofing systems come in a variety of styles, largely dependent on the metal used and coatings applied. Aluminum is a metal that needs no coating. Steel, on the other hand, requires specialized treatment to prevent rusting. Other options for your property are zinc, stainless steel, titanium and copper roofing.

Asphalt shingles come in two varieties, the traditional organic ones and the newer fiberglass shingles. The difference is in their layered make-up. There is a 3 core fiberglass covered with an asphalt layer in the fiberglass shingles and the organic shingles have a heavy felt layer under the asphalt.

Roofing Materials - Choose the right look for your property

Appearance

The layered look of asphalt shingles is by far the more popular of the two types. The vast majority of homes in the United States has asphalt shingle roofing, largely because asphalt is the material most builders trust and what homeowners are accustomed to seeing on houses. Asphalt shingles can vary in colors to match the paint or brick of a home, and the variety of their colors is more than with metal roofing. The three-tab shingles give a flat appearance while the more expensive architectural shingles appear more three dimensional.

Metal roofs are rarely seen in urban and suburban areas. The sleek, metallic appearance seems more suited for an agricultural setting. Metal roofing systems are available in a variety of colors and styles to match the rest of the home. The metal can be in panels, tiles, or shingles, but the appearance of a metal roof still can be jarring in a neighborhood full of asphalt shingle roofs.

Installation

Metal roofing installations are much harder than installing a shingle roof, but due to the weight of shingles, especially the traditional ones, the previous shingle materials may need to be removed first. Also, warranty and insurance requirements may demand the removal of previous asphalt shingles. A roofing square of three-tab shingles, which is 100 square feet, can weigh 200 pounds, and a square of architectural shingles can weigh up to 500 pounds. Because the installation is easier, even with removing a previous roof, installing asphalt shingles can take as little as a day or two of labor, depending on the size of the house.

Metal roofing, on the other hand, is much lighter and can be installed directly over the previous roof. The weight varies by the material used. Aluminum weighs only about 50 pounds per square while steel weighs 100 to 250 pounds. One reason why roofing with metal takes longer is the extra step of laying plywood 4 or oriented strand board (OSB) under the metal. This additional step eliminates the added noise of metal. With proper installation, rain or even hail should sound no different inside a home with a metal roof than it does inside a home with an asphalt shingle roof.

Both of these jobs are best left to professional Albany roofing contractors. Working on a roof can be dangerous, and installing roofing materials is a very precise and demanding job. Areas around vents must be properly sealed, and flashing must be carefully put into place. Also, some warranties may be voided if the materials are not installed by a professional Albany area roofing contractor.

Costs

A metal roofing will cost approximately $265 to $600 per roofing square or $2 to $6 per square foot for steel or aluminum shingles, $120 to $150 for corrugated steel panels, and $700 to $900 for copper or zinc. After adding installation, a steel or aluminum roof will cost about $500 to $1,000 per square. For a home with a 1,500-square-foot roof, this comes to about $7,500 to $15,000. For a home with a 2,500-square-foot roof, this comes to $12,500 to $25,000. This is, on average, about three times the cost of asphalt shingles and is another reason many homeowners opt for an asphalt shingle roof instead.

Energy Efficiency

Asphalt shingle roofing is much less expensive at about $60 to $90 per roofing square for three-tab asphalt shingles or $100 to $120 per square for architectural shingles. Felt is installed under the shingles at $40 per roll of synthetic underlayment, at $85 per 400 square feet. Installation costs about $80 to $200 per square, and removal of a previous roof shingles adds about $80 to $150 per square. If architectural shingles are used, the labor rises to $200 to $400 per square. A highly pitched or steep roof will add even more to the installation cost. For a property with a 1,500-square-foot roof, the cost of a three-tab shingle roof comes to about $2,100 to $4,800 without the removal of the previous shingles, an additional $1,200 to $2,250. For properties with a 2,500-square-foot roof, the cost comes to between $3,500 and $8,000 without the removal of the previous shingles, an additional $2,000 to $3,750. These prices make asphalt shingle roofing an almost certain choice for first-time home buyers and contract builders. Newer fiberglass varieties can be even less expensive.

A metal roof will lower your energy bills by about 40 percent in the summer. The reflective surface lessens the transfer of heat into the home. On the other hand, asphalt shingles absorb the sun’s heat, transferring it through the roof to the home, making the home’s cooling system work harder. This is why asphalt shingles are recommended more strongly for temperate climates.

In winter, asphalt shingles perform better, using the heat absorbed from the winter sunlight to make the home much warmer. However, metal roofs also perform well in winter. The year-round energy usage will still be lower with metal than with asphalt.

Even so, some asphalt shingle styles are designated as cool roofs and join some metal roofs in carrying an Energy Star rating for higher energy efficiency. These roofing materials are certified to reflect more of the sun’s energy, lowering the roof’s temperature by up to 50 degrees Fahrenheit. Even though other factors can affect the amount of savings offered, they can decrease demand on the home’s cooling systems at peak times by 10 to 15 percent.

To offset the cost of installing a new roof, you can look for Energy Star certified asphalt shingles or metal roofs. When using these energy-efficient materials, 10 percent of the materials cost, up to $500, can be received as an energy credit.

Durability

The higher cost of metal roofing is also offset by its long-life expectancy. A metal roof can last for 60 years or more with little maintenance. Most roofing manufacturers offer a 50-year warranty on metal roofs. However, an asphalt roof will need to be replaced two or three times during that same 60-year period. Warranties for asphalt shingle roofs vary from 20 to 25 years.

Asphalt shingles are susceptible to hail and high wind damage, although fiberglass shingles are more durable than organic ones. Also, if asphalt shingles do not get adequate sunlight, they can accumulate mold, algae, or mildew. Metal roofs, on the other hand, are superior performers in high winds and bad weather, and they are impervious to molds, mildews, and bugs.

Metal roofs perform so well under harsh conditions that homeowners in over 25 states are eligible for insurance discounts when they install impact- and fire-resistant metal roofs.

If the metal roof is a low-quality steel without an adequate rust-resistant coating, then use near salt water is not advised. More expensive, rust-resistant metal alloys and coatings should be used instead.

Fire Resistance

Some manufacturers’ asphalt shingle lines are rated Class A for fire safety, especially the fiberglass varieties. Also, all metal roofs are fire resistant, steel and copper more so than aluminum. This makes metal roofing a good choice in areas prone to wildfires.

Recyclability

Metal roofing systems win the day regarding recycling issues. Some are made with recycled materials, and all are completely recyclable. About 1 million tons of asphalt shingles are disposed of each year, and they can be recycled into a variety of products. The cost to recycle them is generally less than to place them in landfills. However, available recyclers for asphalt shingles are few, but the development of more recycling availability is underway.

Maintenance

Repairs are more difficult with metal roofing since most of the metal used is made in sheets and must be replaced that way. When damage occurs to a roof, asphalt is easier and less expensive to repair or replace. Metal roofs require little maintenance and need to be repaired far less frequently.

Resale Value

Because a metal roof is strong, durable, and energy efficient, it should increase a home’s resale value. By some estimations, the resale value will increase by 1 to 6 percent over a house with asphalt shingles. The buyer must appreciate the look of a metal roof, however. Any new roof will help sell a home since buyers want to feel secure about the condition of the roof over their heads.

Infinite Roofing and Construction are the Albany roofing contractors of choice, whether you are going for a metal roofing installation or an asphalt shingle roofing installation. We are experienced in both residential and commercial roofing installations of any type and can best advise you on the best materials for your property. Call us today for a free consultation on 518-444-ROOF (7663).

DIY method to remove Moss and Lichen With Vinegar

June 17, 2019 by Infinite Roofing 18 Comments

Damp conditions are perfect for mosses and lichens to grow, lichen consists of a fungus and photosynthesizing plant, while moss itself is a plant. When materials like leaves collect on your roof, a perfect bed is formed for moss and lichens to grow. People try finding ways to remove moss and lichens themselves without having to hire roofing contractors and there are ways to take care of that problem yourself and also do it in an environmentally friendly way. You can remove moss and lichens from your roof by using vinegar as an environmentally friendly weed killer. Roof cleaning is an important aspect of having your house look new and not aged. Algae and moss on roofs adds years to the look of your house, removal of algae will bring newly replaced roof look and make your house stand out.

Step 1

Ensure to clean up any organic matter on the roof such as leaves, twigs or other debris. Organic material is a perfect growing ground for moss and lichen, not only that it can also rot and possibly damage your roof.

Step 2

Use a push broom, or other sorts of stiff brush, to scrape away any stubborn mold or lichen patches still remaining. Begin with the top of the roof and work your way toward the eaves. For your safety stay well away from the edge of the roof.

Step 3

Use a tall ladder, and set it up next to the house. Get rid of any moss around the roof edges using the brush. Repeat this step and work your way around the house to make sure all sides are covered. If ever any step seems like they may be too dangerous for you to perform yourself, roofing companies always offer cleaning services and professional roofing contractors can always inspect your roof while cleaning.

Step 4

Take a bucket and pour distilled white vinegar into it. The vinegar should be labeled with its acetic acid strength, which shouldn’t be more than 5 percent. To help the vinegar cling to moss and lichens add a 1 oz. of dish soap, and finally pour the mixture into the spray bottle.

Step 5

Use the spray bottle and apply the vinegar to the moss and lichens on the roof, then get off the roof and apply the vinegar to the moss and lichens around the edge.

Step 6

This is where the waiting game begins, it generally takes a couple of days for the vinegar to kill off the moss and lichens.

Step 7

Use the brush that was used earlier to remove the dead lichens and moss.

Step 8

The final step is to clean the roof is to use a garden hose or sprayer to rinse off everything.

An option to consider when trying to avoid problems related to moss and algae on the roof would be to consider the GAF StainGuard technology. When your roof has run its life and it’s time to replace the roof, talk to your local Albany roofing contractors about the possibility of having the GAF Timberline shingles that have the stain guard technology, or the GAF Ultra shingles that have the StainGuard plus technology installed.

Blue-green algae, also known as Gloeocapsa magma, has spread throughout more than 80% of the U.S., leaving dark black stains wherever it grows, and making millions of perfectly good roofs, and the homes they protect look old before their time.

Many traditional algae-resistant shingles use a granule technology developed more than a quarter-century ago. There is a layer of algae-fighting copper in the granules that is released onto the roof when it’s wet. Granules get older as the roof ages, and it releases less and less copper, affecting and reducing the shingle’s algae resistance.

StainGuard Plus™ Time-Release technology from GAF releases algae-fighting copper more efficiently, over time, for long-lasting algae-fighting power.

Unlike the older layered technology, StainGuard Plus™ technology uses specially engineered capsules, that are infused throughout with thousands of copper microsites so copper remains within reach, ready to be activated in the battle against blue-green algae stains.

StainGuard Plus™ uses a time-release technology, its algae resistance so powerful, it comes with a 25-year ltd. warranty against blue-green algae discoloration.

Roofing companies offer GAF products with the warranties in Albany, we at Infinite Roofing and Construction pride ourselves for our GAF certification and the knowledge to sell you the right product, with the correct installation so you as a consumer can get all the benefits provided by the GAF StainGuard technology for the protection it guarantees for your roof.

Moss and lichen are an easy problem to solve, but why not prevent the problem altogether by getting the right material for your roof that would prevent the growth of moss and protect your roof throughout the years.

Looking for a roof that would last years and also be Eco-Friendly?

June 12, 2019 by Infinite Roofing Leave a Comment

Shingles have to be replaced by the homeowners at some point in a roofs lifetime. Conventional asphalt shingle roofs last about 20 years if you are lucky because they are constantly exposed to sunlight, heat, cold, rain, wind, and sometimes snow, sleet, and hail.

If you’d like a roof that will outlast a conventional asphalt shingle roof and is made from eco-friendly roofing materials, consider the products outlined here. Many of them are virtually immune to hail. Green roofing products are many and varied, ranging from recycled-plastic shingles to recycled-metal roofs to sustainably harvested or reclaimed wood roofs to having plants grow on your roof. The best option for your home depends on the design of your home, local building codes, and price considerations.

Recycled Shingles

The most popular and perhaps the most environmentally friendly option would be shingles made from recycled waste materials, such as plastic, rubber, or wood fiber. Some products are made from clean post-consumer waste (waste from homes), others from post-industrial waste (factory waste). Recycled-content shingles are amazingly durable, and they look amazing, too. You’d never be able to guess they were made from “waste” materials!

Waste from landfills are reduced by recycled-content roof shingles help our need to extract and process raw materials, which reduced pollution and lowers energy consumption. Some of these products are recyclable, too, and many come with amazing 50-year warranties. A few even carry fire ratings that could lower your insurance rates.

A popular choice throughout the country has been wood shingles and shakes for homeowners and roofing contractors. Unfortunately, conventional wood shingles are made from old-growth western cedar. Although the amount of energy it takes to produce this product is relatively low, the harvest of old-growth trees is not sustainable in the long run. These shingles are also quite combustible and can no longer be used in areas where there is a risk of brush and forest fires.

If you are still considering installing wood shingles try considering shingle made from reclaimed lumber. Reclaimed lumber products are made from old bridges, mills, old water, and wine tank and other sources.

Slate and Clay Tiles

Slate produces an extremely durable tile, one that can last hundreds of years, and is also an all natural material. It is, however, an energy-intensive process to mine the slate tiles, but most companies salvage slate and clay tiles. Roofing contractors are very familiar with slate roofing as that is getting increasingly popular, the install cost may be a little pricey, but with that being said your roof will last twice as long with barely and repairs to be done.

Metal Roofing

Many metal roofing products include at least some recycled material, but one advantage of metal roofing is that it can be recycled at the end of its life. Because metal roofs can last up to 50 years, roof replacement is less frequent, which means less waste in the long run. They offer exceptional durability and fire-resistance, and they’re ideal for those who want to collect rainwater from their roofs to water gardens (or for household uses). You don’t have to worry about chemicals that might leach from a conventional asphalt roof. Standing-seam metal roofs work nicely as the base for thin-film photovoltaic panels, too.

Metal roofs are great in snowy climates because they allow snow to slide off, which prevents ice dams from forming. (Ice dams can damage roofs of improperly insulated homes.) To protect walkways from snow sliding off the roof, you’ll need to install snow bars or a similar device over walkways, garage doors, and entryways. Although other eco-friendly roofing options may not always be available at every local roofing company or roofing contractors may not be trained to handle the installation of those specific roofs, metal roofing on the other hand is extremely popular and the popularity is growing so most if not all roofing contractors know the inside outs of installing a metal roof.

Rubber Roofing

Another recycled roof material is reinforced rubber shingles made from old steel-belted radial tires. The material is coated with ground slate for texture and comes in a variety of colors. A big advantage to this material is a long life and a 50-year warranty, including against hail and other extreme weather. The only downside to rubber roofing is that it is not always allowed in all counties. Make sure with your local roofing company and the building department that rubber roofing is allowed to be installed on your house.

Green Roofing

A green roof is a roofing system that is an addition to the existing roof and add flora to it. Depending on the green roof type that you plan on installing the plants may be modular or have a drainage system to it.

There are many different reasons as to why a homeowner of a business owner would want to get a green roof. The installation of a green roof reduces the need to manage any stormwater that accumulates, as well as the stress put on local sewer systems. The plants would also help prevent the distribution of smog and would catch any pollutants in the air.

Having an eco-friendly roof not only helps the environment but also as a homeowner, your roof life will last longer preventing the replacement costs. Contact your local roofing contractor today to discuss the options of eco- friendly roofing and how that may benefit you.

Are you a new homeowner? Here’s what you need to know about your Roof.

June 7, 2019 by Infinite Roofing Leave a Comment

If you are in the process of buying your first home, Congratulations! First-time homeownership is an exciting development in your life, and a house is an incredibly valuable investment for you and your family’s future. As a new homeowner, however, it’s important to understand your relationship with your home and how to keep it in great shape for years to come. One part of the home that new homeowners frequently find themselves clueless about is the roof and how to maintain it.

Most home inspectors will pass a house saying that the roof still has 5 to 10 years left. However, most inspectors aren’t trained to look at a house roof and are good at inspecting issues such as furnaces or any foundation problems. Look for roofers in Albany that can do a thorough inspection, do your research and look at different roofing companies and their credibility to pick the best one for your new house.

Once you have a roofing contractor in mind, it’s time to schedule an appointment. The best season for roof inspections is in the summer, hands down. The good weather makes it easier to inspect a roof, and perform any maintenance that is necessary. After your first roof inspection, it is good practice to have one conducted annually – generally in the late summer months like August or September, immediately before the harsher seasons of fall and winter in most climates.

Getting the most out of your roof inspection from your roofing contractor requires careful consideration of your inspection report. Take any issues that you, and the roofing contractor find seriously. Do not assume that because your roof is young it will not have major problems. If something comes up and it’s on your report, address it immediately. The last thing you want is to be left out in the cold – quite literally – in the winter, with a damaged roof.

Here are some things that you as a new homeowner may need to look out for while getting a roof inspection done for your house by roofers in Albany.

1- Look for any discoloration in the shingles.

2- See if the ridge cap shingles are a different color, many times the ridge cap shingles will be slightly different colors, meaning that the ridge vent was leaking and has been replaced, this would indicate that the whole roof is in a need of a replacement after the ridge vent has failed.

3- 4-foot horizontal lines going horizontally across the roof, this means that plywood has gotten wet and soaked up water. Other signs that would confirm that fact is popped out nails, and raising of the studs. All of these factors imply that the roof was previously leaking or still is.

5- Another thing to look at is the condition of the chimneys counter flashing, a good tell of how old the shingles are is to look at the bottom few courses right at the eaves and see if you can see areas where shingle color has worn away, if that is the case then all you would be able to see is the black fiberglass matt. If the fiberglass matt is visible that means that all the granules have fallen off and the fiberglass matt is just soaking up water and will leak soon.

Ones the initial steps of getting your roof inspected by roofers in Albany is done and you now own your dream house, follows the responsibility to maintain your roof throughout the years that you will be living at the house.

Weather and wind can take a toll on your roof quickly and can wear down roofing materials quickly. Blown-off shingles, for example, weaken the overall strength of a house’s roof and need to be replaced. It’s always easier to replace a few missing pieces than the entire roof.

Additionally, if you live in a wooded area or near trees, it’s important to regularly brush off debris from your roof. The added weight of leaves particularly in the autumn, when trees shed their leaves they can press down on your roof, and weaken the integrity. Similarly, you will want to clean out your gutters of leaves and dirt so they can adequately drain rainwater, which is also a threat to your roof if left unchecked.

More than anything else, you should also understand your roof’s warranty and insurance policy. Infinite Roofing and Construction provides a 10-year in-house warranty. Should you get a new roof from us, we will cover the install and materials for 10 years. Insurance does not always cover roofing damage, so be sure to carefully check over your policy to know what is and is not covered, this way you will be ready to protect your roof from damages in the future.

What are “Storm Chasers”?

June 3, 2019 by Infinite Roofing Leave a Comment

Your roof can suffer a great deal or damage when a big storm hits and your roof takes storm damage. Typically, this storm damage is covered by your homeowner’s insurance, which means you are more likely to take action to repair or replace your roof. “Storm Chasers” are fraudulent roofing contractors that know about the increased likelihood of roof repair in areas affected by large storms, and can rip off homeowners with poorly constructed roofing projects. Knowing how to identify these storm chasers can help you avoid falling for their corrupt tactics.

What is a storm chaser?

Roofing contractors who go to areas recently affected by storm damage, rain, hail or strong wind are called storm chasers. They use special programs to locate large storms and determine the value of affected homes. These roofing contractors have immense knowledge about insurance companies they use their knowledge to estimate the cost of a new roof. Local and reputable roofing companies are most likely overwhelmed and overbooked, and the “Storm Chasers” use that to their advantage and go door to door to notify residents that they have roofing services available. Typically, they will start by offering a free roof inspection.

Why are they unreliable?

Most storm chasers only do the bare minimum to replace a damaged roof. They will find the cheapest materials to quickly assemble a new roof, often leaving out important elements that a professional roofing company would take in consideration, and they fail to restore things back to their original condition. The roofs that are installed by them usually only have a lifespan of fewer than 10 years because they are installed using cheap material, whereas a professional roofing company using high-quality materials and techniques would leave you with a roof lasting 40 years with warranties to back up their install. Professional roofing companies have the certifications and licensing while storm chasers usually do not have the proper licensing or insurance to work on roofs.

In some cases, storm chasers do not replace the roof at all. Instead, they give a free inspection, quote a reasonable price and ask for upfront payment. Once they are paid, they move on to the next town without any intention of working on the roof.

What tactics do storm chasers use?

If you want to avoid being scammed by storm chasers do your research before handing over any money. Make sure that the contractors you hire to replace your roof or fix the storm damage have a reliable background and pay close attention to the approach they use. There are a few telltale signs that a contractor is a storm chaser.

1-They come directly to your home

The most obvious tell-tale sign for storm chaser is that they come directly to your door, Roofing companies don’t go out looking for work, especially after a big storm, they know that work would be coming to them as people will try to find reliable roofers in Albany to deal with their insurance agency and get the best repair or replacement possible. Storm chasers, on the other hand, move around to wherever the storms go, they cannot rely on the chances that people in need of roof repair will find them. Sometimes storm chasers go so far as to pretend they were sent by a company that previously worked on your roof. If this happens, ask for proof.

2-They want payment upfront.

No roofing company will ask for payment upfront before starting the job, When you pay storm chasers upfront, even if it is just a deposit, it is likely that it will be the last time you ever see them.

3-They offer to pay for the deductible.

How nice would it be to have your insurance deductible waived? Storm chasers think so, too. If a roofing contractor offers to pay for your deductible, they are probably a storm chaser. It is considered insurance fraud to allow a contractor to pay the deductible. If you let a roofing company pay your deductible, you will be the one responsible for committing the illegal act. Make sure you are familiar with your insurance policy and the laws regarding fraud to prevent yourself from falling into this trap.

4-They create damage that was not there before.

Because they are usually familiar with the insurance claim process, storm chasers sometimes create their own damage if the real damage is not sufficient. They may use golf balls, hammers or other hard, heavy objects to pound dents into your roof. Watch and listen carefully as contractors inspect your roof and have a camera or cell phone ready to catch them in the act if you are suspicious. Adding fake damage for the purpose of collecting insurance money can have serious consequences.

Educate yourself and your neighbors about the common signs of storm chasers to avoid being the victim of a roofing scheme. Check the Better Business Bureau if you are unsure of the legitimacy of a roofing contractor. This will tell you if the business is local and if complaints have been filed against it.

Infinite Roofing and Construction is proud to boast an A+ rating on the BBB. We are a local, trusted roofing company in Albany with over 20 years of experience. Getting a new roof is an expensive endeavor, so make sure you are getting it done right the first time by a company you can trust.

A homeowners guide to protecting the exterior of their house during a roof installation!

May 24, 2019 by Infinite Roofing Leave a Comment

Sometimes during a conversation with the customer, it can be pretty obvious that they care about their garden and landscape. It’s these jobs you’ll know to take extra precautions with, but concerns about landscape don’t always come up in the conversation. Its always wise to maintain a clean job site, as it won’t cause problems post-install, and a clean work site is a safer site for your crew, the homeowners, and any neighbors or visitors.

When homeowners sign a contract with local roofing contractors, usually their main concern is that their roof installation is done properly. Unfortunately, the most common complaints about local roofing contractors is the occasional mess that is left behind after a job, and in some cases, the landscaping around the house can be damaged.

We at Infinite Roofing and Construction follow a “Never There” policy, as professional roofers in Albany we know that in the residential roofing business leaving the work property clean and undamaged is a priority for almost every homeowner, so we don’t take any chances. We always protect the landscaping, and we perform a magnetic sweep of the area after every workday to make sure all nails are picked up.

We also hang tarp on the eaves of the house to prevent felt paper from blowing back and damaging the siding. The bottoms of the tarp are tied down to a tree or trucks so they are tight and any debris slides away from the house. We will move the grills away to prevent any damage. Our customers appreciate this attention to detail around their home.

We take our “Never There” policy seriously, and even though with our roofing company you wouldn’t need to worry about your landscaping, extra care is never harmful, and It’s essential for you to protect the exterior of your home from any possible damage due to a roofing job.

Here are some important guidance for protecting your home exterior during roof installation and repair.

Secure any items hanging on the exterior portion of your home. Protect your at-risk items like patio furniture, potted plants, grills, and gardening tools with tarps and/or plywood, prior to starting roofing work.

You should relocate vehicles, falling within your home’s boundary to protect them from damage, and this includes vehicles parked in the driveway. Also, ensure to cover and protect valuables stored in your attic.

Prune back trees that are present close to the roof line, prior to beginning the roof installation process. This allows proper roof access to the local roofing contractors and prevents damage to the fresh roof.

Mow down your grass to the minimum height possible to prevent the nails from getting concealed, after falling into the long grass and ensure to shut your automatic sprinkler systems down, a day or two prior to beginning your installation to minimize any possible damage.

Secure your flowerbeds or landscaping surrounding your home by screening them with tarps or plastic by protecting them from dust and trash. You should also move out any hanging plants during your roof installation.

Damage to your pools, spas, and any nearby expensive equipment from debris and nails can be prevented. Cover the pools using a tarp and the spas with polypropylene to ensure your property’s protection before starting roof job.

Infinite Roofing and construction will make sure that any and all damage is prevented, and that the customer doesn’t worry about the aftermath of a roofing job, but little extra measures will only help and put your mind at an ease.