roof | Infinite Roofing & Construction Roofing Blog

Is Frost Developing on Your roof good or bad?

October 5, 2020 by Infinite Roofing Leave a Comment

Contact your local roofing contractor to find out about your home.

As the warm months come to a close and fall rapidly approaching, the nights are getting colder and you may have noticed frost developing on your roof. You may have wondered if this is a good or a bad thing. If you step out into your neighborhood and take a look at the other homes, there is a possibility that some roofs have frost and others do not. There is no simply yes or no answer, your roof is unique to your home and the condition it is in.

If you have noticed a layer of frost that has developed on your roof along with all of your neighbors then there is nothing to fear. Insulation is used to keep heat inside of your home, if the heat is trapped inside of your house it should not travel up and out through the roof. On a cold morning if you are not seeing frost on your home, but frost on all of your neighbors then it is a sign of poor insulation. In most cases seeing frost develop on your roof is a good sign that your home and attic are well insulated.

Roofing materials are made to be able to withstand all different types of weather climates, from freezing cold to blistering hot. Shingles are a great affordable option for cold weather climates and provide durability. A shingled roof should never be installed in temperatures below 40 degrees to prevent cracking and breaking. If your roof was installed in the winter and you are not seeing frost form on your roof compared to your neighbors, then there may be a problem and you should call your local roofing contractor. Super shingles are heavy weight shingles that provide 4x more protection and energy efficiency, to better help save money during the cold months. As we always suggest when having any roof work done to your home, be sure to seek out the best roofing company in your area to be sure the work is done properly.

Your roof may not be the culprit if there is a lack of frost developing on your roof, it could be your attic. If your attic insulation is not properly placed heat could be escaping out and through your roof. If you see spotty frost in some areas on the roof but not others, then this is a good indication that your attics insulation is not up to par.

Sun exposure is important to factor in, if your home is fully exposed in the sunlight then frost should easily melt. Do not compare your homes roof to a neighbors if you have different sunlight exposure, a roof in the shadows will contain much more frost. If you home is in direct sunlight, and all your neighbors have frost but you do not, then you should contact your local roofing contractor.

Should there be frost in my attic?

This is another common question we get asked, is frost a bad thing if you are seeing it on the inside of your attic? First it is important to understand how and why frost develops in the attic of homes. When moisture rich air from your home rises up to the attic, the air condenses on the roof sheathing and forms frost. The frost alone does not do damage but once it begins to melt, damage can be done once the sheathing gets wet. The results from melting frost can lead to mold, wet insulation, deteriorating roof sheathing, and water stains. Many people don’t see frost in their attics because it usually melts once the air warms up or the sun warms the outer portion of your roof thus melting the inside. People will most likely see the consequences of frost such as the water stains, or mold.

Prevention

One way to prevent frost from forming in your attic is to prevent it from happening in the first place. Is your attic well insulated? If you’ve had your roof done, or will have your roof done, be sure find the best roofing company in your area that will make sure your attic is well insulated. Sealing off attic bypasses are a good start, an attic bypass is a passage where warm air leaks into the attic of a home. These bypasses are located in a few locations around your roof and interior home. Checking for gaps around furnace vents, electrical boxes, plumbing vents, electrical wires that go into the attic, and sealing up even the smallest of gaps.

Humidity

Lowering the humidity in your attic and whole house can help lower the chances of frost developing inside your attic. Often times we find that when people use a whole home humidifier, frost problems develop and it is impossible to seal off every bypass. Purchasing a humidity meter for your home and attic is a small expense that can save you thousands in the long run.

There are numerous ways to lower the humidity in your home, purchasing a dehumidifier for your attic is a good start. If your kitchen is equipped with a gas stove, try and remember to turn the exhaust fan when cooking. A good amount of moisture is put in the air from a gas stove and the fan will help get rid of it. When you and your family are showering always turn the bathroom fan on, if you don’t have one think about installing one. Even just a 20 min shower pumps a considerable amount of moisture into the air and eventually up into the attic. If your home has a crawl space, check to be sure that there is proper vapor barriers installed.

The Dangers of Asbestos

February 14, 2020 by Infinite Roofing 1 Comment

What is Asbestos? Why is it Dangerous?

Asbestos is a naturally occurring substance. In the environment, it poses virtually no threat to humans. However, the problem with asbestos initially arose out of the full-scale mining, extraction, and use of the substance in the roofing industry which led to an increase of the amount of asbestos in the air. Asbestos fibers are microscopic, so when they are exposed they can become airborne and inhaled. Once inhaled, they can lodge in the outer tissue of the lungs and abdomen, which over time leads to inflammation, scarring and the eventual formation of fatal diseases such as lung cancer. This is why many homeowners have begun to get asbestos roof removals done for their safety. Many homeowners today are seeking to get an asbestos roof removal once discovered.

How Can I Tell If It’s Asbestos?

The reliable way to know if your home contains asbestos is to hire an environmental consulting firm or asbestos building inspector for asbestos testing. They’ll take fingernail-sized samples and test them in a laboratory. You can’t see or smell asbestos, but exposure to loose fibers can cause lung diseases such as mesothelioma, asbestosis or lung cancer. The naturally occurring, flame-retardant mineral fibers are too small to identify without a microscope, so don’t believe anyone who claims you have asbestos but hasn’t done testing.

Is An Asbestos Roof Dangerous?

One of the widest uses of asbestos in the building industry was in roofing. Due to its heat and fire-resistant properties, asbestos was added to many roofing products including roofing tiles. Cement tiles were not comprised solely of cement. Cement roofing tiles were largely made from cement, with the now-banned product added into the cement mixture. Depending on the manufacturer, the cement tiles would typically be made with between 10 to 15 percent asbestos.

In addition to its heat and fire-resistant properties, asbestos has excellent strength and durability features. New homes built prior to the 1970s with asbestos roofs, were lauded for the longevity of their roof systems, as the roofs had a life expectancy of 30 to 50 years. Although asbestos serves as a formidable roofing material, it exposed people to a list of compromising health issues, which led to its eventual ban.

Do I Have to Remove My Asbestos Roof or Siding?

Many homes, especially the ones that were built at the turn of the twentieth century, have siding or roof shingles that contain asbestos. Asbestos has plenty of quality features, including its durability and fire-resistance. However, it also poses many significant health hazards. The inherent question that comes with this is whether it is necessary to remove your asbestos-containing roofing shingles or fiber cement siding to protect your family’s health?

We know that there are many homeowners who want a roofing company that does asbestos roof removal. A homeowner should be aware of the harmful effects that occur with asbestos when someone breathes in a tiny, sharp fiber, which irritates and inflames the lungs. If the asbestos is not airborne, it is not a danger. The asbestos in shingles, siding, and other home products is encapsulated, which is surrounded by a coating of something else that keeps it from becoming airborne. If your roof or siding shingles are in good condition, they are unlikely to pose a health hazard to you or your family. The U.S. Environmental Protection Agency recommends not disturbing asbestos if at all possible.

Unfortunately, while asbestos home products are durable and long-lasting, everything must be replaced eventually. In 1989 asbestos was banned, leading to the asbestos roofs and sidings to fall into disrepair. Many asbestos roofs and sidings are damaged, cracked, or broken. Asbestos siding in particular, however, has a tendency to chip, crack, and break with normal wear-and-tear of family life. This can release the fibers into the air, which poses a threat to your family’s and neighbors’ health.

How Can You Tell If Old Siding Has Asbestos?

Many manufacturers made their products to look like asbestos-free products, so it is not really possible to determine if your siding contains asbestos just by looks. You can easily send a sample to a lab if you suspect that it may contain asbestos. Or you can hire a specialist to take a look at the siding so that they can determine if you have an asbestos siding.

Can I Install New Siding Over Old Asbestos?

Some people try to attempt to solve the problem of deteriorating asbestos siding by installing vinyl siding over on top of it. This practice is not recommended for a number of reasons. First, the siding installation process itself, nailing into existing boards or tiles, is enough to disturb the existing material and create a dangerous condition. Second, installing vinyl siding over any existing materials, particularly those in poor condition, can lead to additional problems in your home and can hide the development of those problems until they become extremely large and costly to repair. Therefore, hiring a specialist or roofing contractor who has the right education for asbestos would help in asbestos roof removal.

Can You Pressure Wash Asbestos Siding?

Painting asbestos siding is not difficult at all, as one of its benefits is that paint easily adheres to it and it is very durable and can last for decades without chipping or cracking. However, when cleaning the siding before painting, the important thing to note is that you should avoid power washing asbestos siding as it can chip or damage the siding and release the dangerous asbestos fibers into the air. If you do pressure wash, use a gentle touch if possible and stop immediately if you find that you’re knocking pieces of siding off. This means that you’ll have to take some extra time cleaning and prepping the siding before painting and rely on a garden hose and sponges instead. If you manage to chip damage your siding and worry it may be made with asbestos, make an appointment to have the material tested to confirm.

Do You Have to Disclose Asbestos When Selling a House?

For starters, it is not illegal to sell a house with asbestos. Obviously, buyers would much rather buy a home with no asbestos concerns. However, outside of a thorough inspection, there is no way to tell if a home contains this potentially toxic material. If you know your house has asbestos, you might disclose the information to buyers. Again, it’s not illegal to sell a home with asbestos, but you can be liable for not disclosing the information to the buyer if you knew it was present beforehand.

Cement Asbestos Roofing

When asbestos came into the picture many manufacturers experimented with it. In the 1880s manufacturers used asbestos fibers in mixtures that resulted in building products like insulation for steam pipes and boilers. It was eventually being mixed in Portland cement and the paste was used as a roof repair compound. In 1907, process equipment was invented that produced rigid sheets from the cement-asbestos mixture. These sheets could be pigmented and cut into manageable shapes and were able to have textured patterns pressed into the surface. The result was very durable siding and roofing shingles that imitate traditional, natural products, both less expensive and lighter than slate. They don’t rot or warp like wood and are extremely fire resistant. It’s not at all surprising that the popularity of these asbestos sheets skyrocketed throughout two-thirds of the twentieth century.

The manufacturers of individual asphalt shingles, which were less expensive and more flexible than cement asbestos, were major competitors for market share in the roofing material industry by the 1920s. In the late 1930s, asphalt strip shingles, coated with granules in a wide variety of colors, were the most popular roof covering.

Asbestos-containing products, like the cement mixture, posed very little health risk if the material is kept in good condition and not disturbed. Severely worn or damaged asbestos roofs and walls, or improper repairs, alterations, or removals can allow the release of the fibers and risk the health of the occupants and neighbors. The EPA provides detailed information about managing asbestos-containing products on its web site.

The Problems

Cement asbestos roof shingles typically have a much shorter life than the siding panels. If a replacement is needed, removal can be a significant expense. If the shingles are severely weathered, to a point that the material can be crushed by hand, professional abatement is needed. Precautions should still be taken even if they’re intact. The fasteners securing them should be kept wet and lowered to the ground instead of being tossed down. Individual states and municipalities may also have additional requirements for the removal and specific requirements for disposal.

Like tile and slate roofs, occasionally there may be some cracked, broken, or missing tiles or slates, or flashing repairs that may be needed. Maintaining an asbestos tile roof can be difficult. Finding contractors willing to work with the material associated with the A word can be a challenge. It can also be a challenge to find contractors that are mindful of the brittle nature of these tiles. Some roofing contractors, experienced with slate and tile roof repairs are willing to repair and restore asbestos tile roofs. The tools, equipment, and techniques they use for their regular repairs are well-suited for working with the brittle shingles. There are also a few good sources of salvaged replacement shingles that with luck can be a close match to the existing roof.

Hopefully, the remaining cement asbestos roof tiles are in good to repairable condition and will be properly maintained for the maximum potential life. Those that are beyond safe repair will need to be properly and professionally removed, and will likely be replaced with a roof that looks like most other roofs, and will likely only last one-third as long.
If you or someone you know is concerned about the effects that asbestos can have on their health, please visit the EPA website for more information on handling asbestos the proper way.

Tips: End Of Summer Roof Maintenance!

August 9, 2019 by Infinite Roofing Leave a Comment

As summer slowly comes to an end and the blazing hot sun is in full gear. Many homeowners are engaging in as many outdoor activities as they can. Like going to the beach, relaxing on their back patio, or grabbing some propane to spark the grill. Hardly anyone is thinking about climbing up a ladder to check in on their roof. During the winter months, the roof has protected you from cold and wet temperatures and now it’s time to for a little roof pampering.

A majority of homeowners believe Fall is the best time to call their local Roofing Contractor to take care of the roof, but roof maintenance is a year-round activity. Summertime is the best time to start as any. Summer brings a bit of challenging weather conditions, including high temperatures, humidity, torrential rain, thunderstorms, and heavy winds.

Taking time to perform a quick evaluation assures your roof can withstand summer heat and storms, is in good operating condition, and maintaining the structural integrity of your home. Just like any other part of the house, the roof requires regular maintenance to keep it functional. Though in theory, you can inspect your shingles from the ground with a pair of binoculars, maintenance should be up close and personal. Please do not hesitate to contact your local roofing contractor. Should you require a local roofing company, Infinite Roofing is here to help!

Should you decide to tackle this by yourself, please be sure you are following the safety tips listed:

Always use proper safety equipment such as a sturdy ladder, a hard hat, eye and face protection, and a harness.
It would not hurt to bring another person along as a precaution.
Be sure you are aware of where you are stepping to avoid an unwanted accident and/or roof damage.

To get you started, here are few roof maintenance tips to help this summer:

1. Gutters and downspouts cleaning. Water always finds its way, so clearing any debris that could potentially clog gutters and downspouts is essential to roof maintenance. Preventing water from flowing to places where it shouldn’t prevent damage to substructures beneath the shingles and under the foundation

2. Trim away overhanging branches. Tree branches that hang over the roof offer a highway to heaven–or a warm, dry home– for small birds, squirrels, and other rodents you may not want living in your home. Tree limbs and branches are a common cause of roof damage but can be easily prevented by trimming away any large tree branches that could snap due to the wind, heavy ice or snow or even disease and decay. During the warmer months, you will notice more debris on the roof from leaves and dust from small branches and pine needles. Prompt bris removal is critical for a long-lasting roofing system.

3. Moss Removal. While trees may provide shade when you want to relax out front on a hot summer day, shade also means added moisture. A roof that does not get much sunlight in the rainy months is also at risk of moss growth. Be sure your local roofing contractor monitors your shingles for signs of moss, mold, or mildew growth and remove it immediately if spotted. Some moss killers may cause discoloration and/or damage roofing materials. Roofing contractors will guarantee the use of safe chemical moss killers.

4. Replacing damaged and/or missing shingles. Most roofing contractors agree that a roof can last between 15-20 years. It also depends on if the old roof was removed and there is only one layer of shingles, and if it’s ventilated properly. Keep in mind, if a roofing contractor has installed a roof over an existing layer or several layers, and it is older than 15 years, chances are you’ll most likely need a new roof. Shingles that are buckling or curled are another sign that you may need a new roof.

5. Repair broken flashing and damaged seals. Sealing and flashing are essential components in your home’s battle against moisture. If there is any penetration through the roof, there is the probability that the flashing and seal directing water away from the hole will fail. Check roof penetrations and repair leaks immediately to prevent further damage. Your local roofing contractor can help you determine the state of your flashing and sealing and can advise you as to whether or not repair or replacement is needed.

6. Blocking animals from entering the home. Four-legged pests such as rats, raccoons, and squirrels will gladly accept an invitation to move into your attic, ruin insulation with urine and feces and/or chew through electrical cords and cables. Use an industrial cloth or any other means to block access through roof vents and other openings.

To Sum It Up!

End of maintenance can be a bit intimidating, especially for new homeowners so if you’re unsure of what to do or just don’t have the time to inspect your roof yourself, make arrangements for your local roofing contractor. They can help you spot problems before they develop into costly repairs!

A homeowners guide to protecting the exterior of their house during a roof installation!

May 24, 2019 by Infinite Roofing Leave a Comment

Sometimes during a conversation with the customer, it can be pretty obvious that they care about their garden and landscape. It’s these jobs you’ll know to take extra precautions with, but concerns about landscape don’t always come up in the conversation. Its always wise to maintain a clean job site, as it won’t cause problems post-install, and a clean work site is a safer site for your crew, the homeowners, and any neighbors or visitors.

When homeowners sign a contract with local roofing contractors, usually their main concern is that their roof installation is done properly. Unfortunately, the most common complaints about local roofing contractors is the occasional mess that is left behind after a job, and in some cases, the landscaping around the house can be damaged.

We at Infinite Roofing and Construction follow a “Never There” policy, as professional roofers in Albany we know that in the residential roofing business leaving the work property clean and undamaged is a priority for almost every homeowner, so we don’t take any chances. We always protect the landscaping, and we perform a magnetic sweep of the area after every workday to make sure all nails are picked up.

We also hang tarp on the eaves of the house to prevent felt paper from blowing back and damaging the siding. The bottoms of the tarp are tied down to a tree or trucks so they are tight and any debris slides away from the house. We will move the grills away to prevent any damage. Our customers appreciate this attention to detail around their home.

We take our “Never There” policy seriously, and even though with our roofing company you wouldn’t need to worry about your landscaping, extra care is never harmful, and It’s essential for you to protect the exterior of your home from any possible damage due to a roofing job.

Here are some important guidance for protecting your home exterior during roof installation and repair.

Secure any items hanging on the exterior portion of your home. Protect your at-risk items like patio furniture, potted plants, grills, and gardening tools with tarps and/or plywood, prior to starting roofing work.

You should relocate vehicles, falling within your home’s boundary to protect them from damage, and this includes vehicles parked in the driveway. Also, ensure to cover and protect valuables stored in your attic.

Prune back trees that are present close to the roof line, prior to beginning the roof installation process. This allows proper roof access to the local roofing contractors and prevents damage to the fresh roof.

Mow down your grass to the minimum height possible to prevent the nails from getting concealed, after falling into the long grass and ensure to shut your automatic sprinkler systems down, a day or two prior to beginning your installation to minimize any possible damage.

Secure your flowerbeds or landscaping surrounding your home by screening them with tarps or plastic by protecting them from dust and trash. You should also move out any hanging plants during your roof installation.

Damage to your pools, spas, and any nearby expensive equipment from debris and nails can be prevented. Cover the pools using a tarp and the spas with polypropylene to ensure your property’s protection before starting roof job.

Infinite Roofing and construction will make sure that any and all damage is prevented, and that the customer doesn’t worry about the aftermath of a roofing job, but little extra measures will only help and put your mind at an ease.

5 Most Amazing Roofs in the World!

May 17, 2019 by Infinite Roofing Leave a Comment

While most roofs your see constructed and completed by your local roofing companies may not strike the eye that much. They may seem just like any other roof in your town, something you see every day. These typical roofs are constructed to weather the elements and help regulate temperatures. There are times when you get to travel the world or even just in your home country and you get a chance to see the amazing architecture around, and some of those buildings have the more interesting designs that contain unique architectural features hyper-functionality or fantastic panoramic views, qualifying them as tourist attractions. When it comes to roofs with a high degree of visual appeal, here are some of the most amazing roofs in the world.

Cube Houses

Cube houses are a set of innovative houses built in Rotterdam and Helmond in the Netherlands. They are based on the concept of “living as an urban roof. These cubed roofs are tilted on a conventional house 45 degrees and are rested upon a hexagon-shaped pylon. His design represents a village within a city, where each house represents a tree, and all the houses together form what may seem like a forest. The central idea of the cube houses around the world is mainly optimizing the space, as a house, to a better distribution of the rooms inside.

Brazilian Leaf House

Just outside of Rio de Janeiro, sits a beautiful little house by the amazing blue water, with a flowering roof that protects and shades like a tropical banana leaf. The open-air abode designed by Mareines and Patalano is meant to encourage interaction and connection between man and nature. With verandas and open spaces in between rooms and no corridors, the tropical beach house is perfect for parties and social gatherings. The open layout also takes advantage of trade winds that blow in from the sea which provide natural ventilation and passive cooling.

Grand Palace

The king of Thailand has some pretty sweet digs, Located in Bangkok, Thailand this palace grounds span about 2.35 million square feet. These images portray the top of the throne hall (known as Phra Thinang Dusit Maha Prasat). The adornments are extremely complex and beautiful, but each one is chock full of symbolism pertaining to Thai history and Culture.

Sydney Opera House

The curvaceous shapes atop this opera house in Sydney, Australia makes this structure unique throughout the world, East of the “shells” are concrete panels covered by over a million Swedish tiles. 14 years of work and around 102 million Australian dollars were put in creating this majestic and very famous roof.

Marina Bay Sands

Opened in 2010, the SkyPark at Marina Bay Sands in Singapore is truly a roof with a view. This rooftop oasis, complete with tree and flower garden paradise, stands over 650 feet in the air and is constructed from 7,000 tons of steel.

Installing a Skylight

April 8, 2019 by Infinite Roofing Leave a Comment

What’s better than a vertical window? A window on the roof that lets in significantly more light, making even a small room feel much larger and airier. A skylight can make a huge difference to a room.

Be sure to take in the sun’s path into consideration when planning to install a skylight. Skylights facing north or east may not get any direct sunlight, while skylights on the south- or west-facing portion of the roof will collect direct sunlight.

The skylights that take in and receive direct sunlight are bound to become a heat trap on hot days. So, be sure to plan ways to control heat gain if installing a skylight in the south or west is your choice. Some manufacturers sell Venetian blinds or remote controlled shades for their skylights. Either of these could be an effective way to minimize the problem. Another solution is to choose a ventilating skylight that can be opened to allow hot air to escape.

One extremely important aspect to consider when installing a skylight is that if you are installing a skylight in a room that has an attic above, you’ll need to build a light shaft. Building a shaft is the hardest part of installing a skylight. A professional roofing contractor would best be able to handle the different aspects of building a shaft with the right precision.

The shape of a light shaft controls the spread of the natural light beam. A perpendicular shaft with vertical sides focuses the light straight below and a shaft that’s flared on all four sides spreads light over the widest area. A shaft flared on only one or two sides sends more light in the direction of the flared sides.

Building permits are required for a skylight to be installed, so before installing a skylight be sure to research the local codes and factors that may affect the skylight.

To capture a view from a roof window in an attic requires a lot of planning, from sizing to where it is being placed on the roof.

The roof’s slope will also affect proper placement. For the same amount of view, a low-sloping roof will require a taller window than a steeper roof. Manufacturers of roof windows have charts that list recommendations based on the slope of the roof.

Installation Supplies

Here’s what you need to install a skylight:

You will need drywall and finishing supplies for the ceiling, 2-by-4s for the frame, roofing paper, 16d galvanized nails, roofing nails and of course the skylight itself.

Your toolkit should include a hammer, tin snips, utility knife, flat pry bar, and a circular saw.

Step-by-Step Skylight Installation

This is not an easy project and requires a lot of tedious steps which need to be followed and done correctly or the roof will leak around the skylight. Installing a skylight involves cutting the roof and installing new structural framing members as well as installing drywall and finishing the ceiling beneath the skylight. The metal flashing and roofing paper must be installed correctly or that would likely be the main cause of your roof leaking. If you think that you have good carpentry skills, and can follow the manufacturer’s directions correctly to install, it can be done as a DIY project; otherwise, hiring a professional roofing contractor.

The instructions presented here will give you an idea of the work involved. Some skylights use different installation methods and different types of flashing.

1. Cut & frame the opening.

Cut the hole in your roof following the manufacturer’s specifications. First, drill a hole from the inside where you want the center of the skylight to be as a locator and then work on the roof to cut the opening with a circular saw. Reference back to the building codes and be sure that you frame the opening so it is structurally sound. Be sure to properly support the ends of roof rafters before cutting and removing them!

You’ll also need to cut a hole in the ceiling of the room below and frame a light shaft if the skylight is being mounted above an attic. Yes, this does sound like a complicated step and one that would require a great deal of precision to be done in the way that you need it to be done. If you’re not familiar with basic carpentry practices or you are installing a large skylight that will require the removal of more than one roof rafter, consult a professional roofing company to do the install the right way without any problems.

2. Cut back the roofing & attach the skylight.

Cut the roof shingles about 3 inches back from the opening on all four sides using a utility knife and a straightedge. Set the skylight in place, and attach it to the roof with nails or screws.

3. Slip in the underlayment.

Slip the roofing paper under the shingles and have it cut about 8 inches wide. Install the bottom piece, then the sides, and then the top. Developing an overlap between the pieces that are down-roof with the pieces that are up-roof is the idea, so water will shed properly. Use a flat pry bar to lift up the nails so you can try and get inside the shingles to sneak in the paper, this should be done very carefully so any shingles don’t get damaged in the process.

4. Install bottom & step flashing.

Install the bottom flashing, a single piece that wraps partway around the skylight and sits on top of the roof shingles. Drive roofing or flashing nails horizontally into the skylight, not vertically into the roof.

Take the individual pieces of step flashing and slip them under the shingles Start from the bottom and work up from each side. There should be a 4-inch overlap between the step flashing pieces. Make sure to attach the flashing piece to the skylight and not the roof.

5. Install the solid flashing pieces.

To ensure that the water can’t enter between the step flashing and the skylight, the pieces are designed to fit perfectly onto the skylight. Start from attaching the bottom piece first and then move onto the side pieces, and finally the top piece by slipping it under the roofing and attaching it to the skylight.

Solar Powered Skylight

The Solar Powered skylight features a solar panel that captures any available daylight and uses it to recharge a highly efficient, fully concealed battery powered operator and control system. The battery powered operator is the power source that opens and closes the skylight. A rain sensor is built in to close the unit in the event that inclement weather arises, with the addition of solar powered skylights to your house you will not only bring the extra light into your house but also save money in the long run with your electricity bills.

Skylight Solar Blinds

Installing skylight light solar powered blinds help cut down the expenditures as well, these skylight solar blinds prove to be a green alternative and cut down the hassles associated with replacement and disposal of normal batteries. A few of the other features of these solar powered blinds and shades are:

They are usually plug-and-play systems, which means there is hardly any construction cost that you have to otherwise bear in case of hard-wiring.

There is also no need to track walls to find electric mains, which translates into ease of fitting.

You are able to cut down on operational expenditure that is associated with the replacement of batteries.

Installing a skylight is a fancy addition to any roof and the room that it will be coordinated with. Making sure that the installation is done right the first time around is very important to save yourself any troubles in the future. Roofing companies provide the warranties with their installation and they have skilled roofing contractors that have worked with skylights before and know the installation in and out. Roofing companies will also inspect your entire roof in the midst of installing a skylight. That can help if there are any underlying problems that weren’t evident previously.

Roof Replacement: Professional vs DIY

April 5, 2019 by Infinite Roofing Leave a Comment

Professional roof shingle installation | Infinite Roofing & Construction

When it’s time to replace your roof, you may be looking to do it yourself and save money, but roofing can be a dangerous task. The height, lack of safety knowledge, lack of specialist equipment and the fact that a roof can become unstable during replacement are just a few major reasons why replacing the roof yourself can be dangerous. However, roofs get damaged over time, you may see a leak in your roof, it could be damaged in a storm or it is just plain getting old. Then your roof will need to be replaced or repaired. The question is how do you know if you should be hiring a professional roofing company or doing it yourself?

Hiring a Professional

If you want to know that your roof will be replaced or repaired correctly, then hiring a professional would give you that peace of mind. Professional roofing companies have access to all the right materials and tools for the job. Plus, they have years of experience to do the job correctly. Professionals are also able to inspect the property and advise you if there is anything else wrong with the roof that would need to be repaired. Let’s say a few shingles knocked loose in a storm, and you hired a roofing company to replace the shingles that knocked loose. Any other damage done to your roof by the storm may have not been visible to your untrained eyes, but a professional roofing contractor would be able to tell after an inspection. This does not mean that your roofing contractor will spring surprise costs on you. A good roofing contractor will offer a thorough quote or estimate before beginning any work, so you know exactly how much the services cost and why these repairs are being done.

A great bonus to having a professional roofing company is that their replacements are usually covered by warranties. These warranties can offer you peace of mind in case anything goes wrong within the time span outlined in the warranty agreement, and will potentially save you money if something does go wrong. Most warranties are only valid if installed by a professional.

Putting yourself in danger is one of the last things that a homeowner wants, getting on the roof yourself can be very dangerous, by hiring a professional company to replace or fix your roof will save yourself the trouble of putting yourself in danger.

Doing it Yourself

Replacing or fixing your roof yourself comes with some caveats. Firstly, as mentioned previously, it can be a very dangerous task for someone who is untrained to replace a roof. Roofers are up and walking around on roofs every day and are trained to do so safely. They know how to navigate around any dangerous situations and they know how to keep themselves out of danger. Besides being up high on your roof, there are other construction-related safety issues to be concerned about. Another downside to replacing your roof yourself is that you probably do not have the experience or know how to get the job done correctly. Your roof is such an important part of the infrastructure of your house and you want to make sure that a repair or replacement is stable and durable. If a small leak is not fixed the right way, it could escalate into a much bigger problem.

Small repairs might be the only situation that might work out in your favor when doing it yourself. For example, it may be easier and more cost-effective than hiring a professional if you only have a shingle or two to replace, or if you have a small leak that just requires sealant.

Summary

When debating whether to hire a professional to fix/replace your roof or whether to just do it yourself, there are many factors to take into consideration. Overall, you want to make sure that your repair or replacement is done right so that your roof can last, and not cause any problems in the future. The professionals at Infinite Roofing have the experience and expertise you need to get your roof replacement done right.

Spring Cleaning for your Roof

March 21, 2019 by Infinite Roofing Leave a Comment

As flowers start to blossom, the temperatures start rising and families are spending more time outside taking advantage of the warmer weather, you know it’s springtime! With spring approaching, many people like to take part in what is called “spring cleaning”. It is a great way to prepare for the year ahead.

People can clean out their closets, give the house a thorough cleaning inside out, give the landscape a makeover and plant a beautiful garden to enjoy all summer.

It isn’t too often that people think about cleaning their roofs. That should be the least of your worries, right? But this is just as important as any other spring cleaning task, if not more so. Especially after the winter months.

Many people don’t know what a spring cleaning checklist for roofs would look like, and that is why we’ve put together a list that would help accomplish the spring cleaning for your roof and have it be ready for the summer months to come. Your roof should be maintained on a yearly basis.

1. Tackle the gutters

Gutters should be the first thing to tackle when thinking about giving your roof that spring makeover. The fact that winter just passed makes it very likely that the gutters are clogged with rotting leaves and a lot of debris. It is frustrating thinking that you may have just cleaned your gutters in fall, but time does take its toll and in order for the gutters to do their job they need to be cleaned thoroughly and in a timely manner to maintain the integrity and durability of your roof.

If the draining system isn’t working properly then it’s likely that your shingles, siding, soffits and more will be vulnerable to damage. It is always better to maintain and clean ahead rather than ignoring your roof and gutters than be faced with a larger problem in the future that you may need to hire a roofing contractor for.

The first step to cleaning out your gutters would be to take a sturdy ladder and clean all the debris from the gutters. Once you’ve cleaned out everything visible to you on the surface, move on to the downspout. This is the more complicated step when it comes to cleaning the gutters, but also the most important one, as this is what actually drains the water away from your house. Try running water through it using a hose or plumbers snake to unclog. If all else fails; take it apart, find the source and then put it back together. Doing these steps thoroughly should take care of gutter maintenance and cleaning.

2. Inspect the roof

Shingles are the first line of defense on your roof. They’re the small, overlapping rectangular pieces that layer together to cover your roof. While not all buildings utilize shingles, most residential homes do. When you’re working through your roof repair checklist, make sure to pay special attention and examine them. There are a number of things to watch out for, but try to do an examination as best as you can from the ground.

Getting on your roof can be dangerous and should be avoided if at all possible. Hiring an Albany roofing contractor would be the safest choice, but if you do need to get up on the roof, make sure to follow every safety procedure.

Once you are on the roof check for missing shingles. If you find any missing you should get it replaced immediately by a roof repair company. A missing shingle can expose your roof to infrastructure damage such as flooding, mold, and rot.

The other thing you need to look for when inspecting the roof is any stains or signs of streaking on the shingles. If there are stains, that usually indicates that there is a leak somewhere or that the ventilation system is damaged. This is a problem that needs to be dealt with by a professional Albany roofing contractor so that the underlying cause of the problem is determined and fixed.

3. Trim Branches

You may not think that branches could harm your roof but it is one of the biggest threats your roof can face. The best way to avoid damage from your yard’s trees is to trim the branches back. Again, this can be a dangerous job if you don’t have the proper equipment or if you have hard to reach higher areas. Consider calling a professional Albany roofer for any jobs that you think may not be safe for you.

The added benefit of trimming the branches of nearby trees is that you’ll spend less time raking out leaves from your gutters in the future. Taking care of this step during the spring is also much easier than waiting until everything is in full bloom.

4. Keep an eye out for mold

Always look out for mold or mildew when inspecting your roof,. If it’s caught early enough it can easily be fixed but if not kept in check the mold can seep in deeper and cause some major problems.

You can use some home remedies to control the mold if it’s only a small patch, but if it covers a larger area it is recommended to call in an Albany roofing service as it is more than likely that the mold seeped in deeper and is affecting some of the major structure of the roof.

5. Check from inside out

Often this step is overlooked as everything may look fine from outside, but it is extremely important to check your roof from the inside. You can often identify problems that can’t be seen from even the most thorough inspection outside.

Your first move when checking the inside should be to go up to the attic and check for any light source. If you see light shining in from outside, this means there may be a hole in the roof. Also, check for any mold or mildew or any smell that may be damp or doesn’t seem to be normal. If you do find anything out of the ordinary inside, it may mean that there is a problem somewhere that you can’t see. Call an Albany roof repair company to get it thoroughly checked.

While some people may attempt to work through this spring cleaning checklist on their own, untrained eyes often overlook things and getting up on your roof can be dangerous. When you hire a professional Albany roofer, not only will the entire process move more quickly, but you’ll be sure that nothing was missed during the inspection.

Albany roofing professionals like the ones at Infinite Roofing and Construction have the experience and expertise to provide you with a comprehensive inspection both inside and out. Once you’ve cleaned your gutters and trimmed your branches, give our experienced roofers a call so that you can tackle any underlying issues immediately and avoid further damage.

Remember, if you’re not trained to see specific problems it’s very easy to miss them, so get a professional roofing service to come out and look for you. Don’t pass on your yearly inspection! Spring is the perfect time for repairs and preparation for the warm summer months.

When you hire an experienced roofing contractor from Infinite Roofing, we can guarantee that the job will be done efficiently and with no hidden costs. We aim to repair only what’s needed and preserve all areas of your roof that are still in good condition.

Seeking out a roof repair company for small jobs will provide a sense of calm when it comes to maintaining your roof for a long time. Most the time a lot of roof repair companies would make your job easy and take care of the whole roof repair process from start to finish.

Hiring the right roofing contractor

There are a lot of Albany roofing contractors, but if you need a professional service from an experienced Albany roofing service, please call (518)-444 ROOF at Infinite Roofing and Construction and we will take care of your roof using our residential or commercial roofing contractors and help you cross off everything from your roof repair checklist!

Hiring a local Albany roofing contractor would not only make your job easy but you can also get a couple of quotes from different roofing companies in Albany for comparison. You will find Infinite Roofing‘s quote highly competitive and their service second to none.

How to Weatherproof a Roof

March 19, 2019 by Infinite Roofing Leave a Comment

Weather is an extremely strong force of nature, every year there are thousands of weather phenomenon that occur throughout the year that cause damage in many ways. Businesses, people’s houses and things they own get destroyed due to these storms. You as a homeowner don’t want to be the person whose house and belongings are affected by the weather. Prepare yourself ahead for unpredictable weather. Start by weatherproofing your roof as that is the first thing that comes in contact with the harshness of weather and is most likely to be affected. Homeowners know that top quality roofing is what keeps your home dry and prevents any serious damage from weather, but even then quality roofing can only go so far to fight off the elements that it is put through on a daily basis. Without maintenance, even the good quality roofing can succumb to the forces of nature as easily as the low-quality stuff that most of us try to avoid. If your roof is a low quality you might want to think about replacing the entire roof and have a complete roof replacement done. On the other hand, if you already have a top-notch, durable and long-lasting roof and want to further weatherproof your home, we have some ideas that will help.

Deicing Cables

Serious buildups of ice are called ice dams, they can often overwhelm gutters and clog up your roof systems so that it doesn’t function properly. If ice dams is a problem you suffer from frequently then deicing cables is the perfect solution to your problem and will protect your roof. The cables are fairly easy to install and they work to break up the ice before it can build up too much. Deicing cables basically mean heating cables that run on electricity to warm up. When plugged in, it heats up to the ideal temperature to melt the ice. Installing deicing cables isn’t all too difficult—you can do them yourself as long as you are confident doing some hefty DIY projects and comfortable climbing up safely on the roof. The cables are mounted underneath existing shingles to keep them from causing a leak. Mount the cables in a series of locations over the section that builds up with most ice. Make sure that the cables dip down the gutter a bit and run it down through the downspout as well to help warm it a bit and to get the water to flow downwards and out the gutter. On the other side run the cable down to an exterior plus and plug it in when you need power and unplug when not in use.

Peel and Stick Underlayment

Most roofing companies use tar paper for their roof underlayment installation. It is cheap and is easy to put on. Cheap and easy doesn’t mean it’s the right option for your home. If you are considering having your roof replaced and have a new one installed, consider using the peel and stick underlayment. The installation for this product is extremely easy as it doesn’t require any nails or such. It works with a pre-applied adhesive that sticks when adhered. Peel and stick are also far more flexible than tar paper making it more resistant and durable over time. The best scenario would be to use this underlayment throughout your roof, but just putting it around the edges where the roof takes the most damage from ice buildup and wind would be ideal too. It sure is more expensive than using tar paper, but for the added protection and durability it is worth the added expense.

Upgrade Attic Insulation

Usually, attic insulation isn’t a big concern when it comes to weatherproofing your roof, but if you live in the northern areas and in the colder climate it does make a difference. Let’s say that your roof is covered in snow, and if too much hot air escapes through your roof the snow will melt and form ice. Ice forming on your roof is a problem that everyone should be concerned about as ice damages your roof. To avoid this issue, installing quality insulation in the attic will keep the heat inside reducing the chances of any ice forming on the roof and on top of that you would be reducing your heat bill as the insulation will keep the heat trapped in the house and letting it not escape. Less heat escaping would lead to using less heat, reducing your bills and saving you some money.

Install Gutter Guards

The gutters play a very important part when weatherproofing, they provide a way and act like a highway for all the water to go downspout and away from your home. Gutters need to be checked every season to make sure there is no debris clogging up the gutters. If there is that can create a problem. You want to avoid any of those problems by maintaining the gutters and adding extra safety measures to protect yourself from any mishaps happening in the future. If your house is surrounded by many trees and you are worried about leaves clogging up the way consider getting gutter guards. These grates or cages are installed over top of your gutters to keep leaves and other large debris from collecting, and the water keeps flowing freely underneath the guards. With gutter guards, most of the debris will fall on top of the guards and eventually blow off with the wind, anything remaining can be taken care of easily by a broom. They are also extremely easy to install and you can do that yourself.

Here’s to your new and improved weatherproof roof!

4 Ways Roofers Will Rip You Off!

February 21, 2019 by Infinite Roofing Leave a Comment

At Infinite Roofing we are very experienced when it comes to roofing and dealing with the mess left behind by other roofing contractors. This experience did not come easy and unfortunately roofing is a mostly non-reputable industry. There are out of town storm chasers looking to collect checks and never come back, contractors that will request more money before the job is done, roofers that do not have the manpower and end up leaving roofs half open over night when rain is coming and properties are extensively damaged from them not properly “drying in”. Roofing companies that will intentionally quote for quality materials and then use the cheap stuff. Home owners tell us all sorts of horror stories about their previous roofing contractors. Hopefully this will help to inform you about some red flags to look out for.

Many of us here at Infinite Roofing started out working as laborers years ago for some other not so notable roofing companies, doing all the hard graft like carrying shingles up and down ladders. Over the years, we’ve seen it all. We have learned all the ways other roofing companies will try to rip you off!

1. Plywood Replacement

Most roofing companies will offer a select amount of pieces of plywood replaced for free and then offer additional pieces of plywood replaced for an additional cost to the homeowner. The problem that can arise in this situation is that most homeowners are not home while the roofing project is being completed. So when the roof is torn off and a non-reputable roofer sees that there is only 2 sheets of plywood that needs replacing, he will add additional sheets and tell the homeowner that 12 sheets were replaced. The current market price of pieces of plywood are replaced at anywhere from $40 to $75. If someone is charging you for 10 sheets of new plywood but only replaced 2, then they have ripped you off $400-$750 and you would never have any way of telling because you were not present during the install.

In order to protect yourself from being ripped off this way there are a few things you can do. One would be to stay home and count the amount of plywood that has been torn off and replaced as the job is taking place. Another would be to go up in your attic or crawl space and look at the ceiling or bottom of the roof. If it is unfinished with no sheetrock then you should be able to see the plywood decking. Any new plywood will look significantly different from a plywood material that is over 20 years old. The new plywood will usually just be a brighter color. It can also be different makes such as OSB and the difference in appearance can be easily recognized against plywood.

2. Only Three feet of Ice and Water Protection

When most roofing companies write a contract, it will include six feet of ice and water barrier along the bottom edges of your roof to prevent ice damns from causing leaks in side your house. To achieve six feet of this protection, roofing contractors will install two courses of a three foot roll. Ice and water barrier is an expensive underlayment and the difference in cost between installing one course and two courses can be at least a few hundred dollars depending on the size and complexity of the roof. Many roofing companies that offer you the lowest price to complete your roof will not want to factor in this cost and will usually end up only using one course of ice and water.

Most roofing companies in the Albany NY and Saratoga Springs area, know that six feet is required but will choose to install three. Most local building codes call for 24″ of ice and water protection installed past the warm wall. The problem here is that most roofs have a 18″ – 24″ overhang at the eaves. This is why we prefer to and will always go above and beyond the code. Infinite Roofing backs up our work with a ten year warranty and we do not want to be responsible for a leaking roof. Once the ice and water is installed over a 24″ overhang it only leaves 12″ above the warm wall. This will cause the roof to leak after the ice continuously melts and refreezes again causing ice dams that causes water to be pushed up under the shingles further and further every time it melts and refreezes. One course of ice and water will eventually cause leaks. The roof may not leak the first year but could last 10-15 years before the leaks start damaging the plywood decking, framing, Sheetrock and finish trim. This will either be a very costly roof repair job or it might just make economical sense to replace the whole roof prematurely and losing out on at least a few good years of roof life expectancy. The only way to prevent being ripped off in this manner is to stay home during the roof replacement and watch to make sure that two courses of ice and water are installed.

Here at Infinite Roofing, in most situations we will have the old shingles completely torn off the house by 10 am. By 12 o’clock noon, the whole house should be covered in underlayments. So sometime in between 11am and 12 would be a good time to take a walk outside and peak up at the house to ensure two courses of ice and water have been installed. This will look like 2 courses of a 3′ roll along the bottom edges of the roof. It is usually black with a granular type surface. The courses installed on top of the ice and water will be a synthetic underlayment and will usually be a different color making it easy to tell the two apart. Reputable roofing companies will include the cost of this in their contract and will have enough work so that they do not need to cut corners to make more profit. This is why it is important to make sure you’re comparing “apples to apples” when comparing bids. One roofers bid may come in $1,000 less but will only last 17 years due to cheap underlayments and not enough ice and water installed. A higher bid will include name brand quality underlayments and six feet of ice and water. A roofing system with name brand shingles and better underlayments will generally last a good few years longer than a roofing system with cheap shingles and underlayments. This is why it is important to consider the cost of the roofs life more than the cost of the roofs install. A roof that cost less today will most likely cost a lot more in the future.

3. Step Flashing wasn’t included!?

When roofing companies give an estimate, they can sometimes leave out small details like step flashing replacement. Step flashing is a part of the shingle roofing system and should be replaced when a new roof is installed. Step flashing can normally be a tricky thing to include in estimates because sometimes the step flashing is nailed to the wall behind the siding making it impossible to replace without completely removing and reinstalling large sections of siding. Removing and reinstalling siding can cost hundreds more than most people will not want to pay when they have a cheaper bid. This cheaper bid will most likely not include step flashing. Once the roofing contractor shows up and rips off the roof you may get a call saying “your step flashing needs to be replaced and it’s going to cost $700 more”. Or worse even they will not communicate this to you until the job is finished and then you will be stuck paying for something that should have been included. Many low bid roofing companies work this way. This can be avoided by making sure that step flashing is clearly defined in the contract. When the step flashing is nailed to the wall behind the siding we will give the home owner the option of leaving the old step flashing or performing the siding repair to be able to get the old flashing out. Leaving the old flashing in is fine in most cases as it will last the lifetime of the house when installed correctly. Step flashing only leaks when its made of a corrosive material and rots out after 30 years. Step flashing that is made of aluminum or galvanized steel will only ever leak if installed improperly by a low bidding roofing company.

Step flashing is not to be confused with apron flashing. Apron flashing is usually one continuous piece of flashing that is installed horizontally along the bottom wall of any dormers, additions, or any wall to roof transitions such as porches or overhangs. It is fastened to the wall under the siding and usually protrudes about 4 inches over the top course of shingles. This flashing is typically not included in most roof replacements because it is attached directly to the sheathing on the wall and would need the siding to be removed to be replaced. Unless this is called for on an estimate it will not be included in the job and the roofing company will just re use the old flashing as it is made of a non corrosive metal and will last the lifetime of the house if installed properly. To prevent an issue from arising about step flashing, just make sure that all the roofing companies you are requesting bids from have included step flashing in the quote.

Counter flashing is also a gray area on most contracts. Many roofing companies will not include this in a quote. The counter flashing is a part of the chimney and therefore does not fall on the roofers scope of work. Infinite Roofing will include an option to replace chimney flashing at an additional cost if it is needed. We started installing counter flashing due to our customers having a real hard time finding a chimney specialist to provide a quote for the work. Counter flashing is something that must be done by a very experienced roofing contractor as it requires a high level of craftsmanship. Be very weary of roofing companies that say they will include this for free. They are looking to do whatever it takes to sell the job and can not possibly provide the attention to detail that replacing the counter flashing requires for free.

4. Wrong materials

Shingles – Some of the worst roofing companies will quote you for a top quality shingle such as GAF and then actually use a far less quality shingle saving themselves about a $1,000 for an average sized roof. These roofing companies will get away with this for a while because many times the shingles are delivered to the top of the roof by a boom truck. When the shingles are delivered to the rooftop, the only way you can tell what kind of shingles are being used is to go outside and look for the name on the packaging when the used shingle wrappers are tossed off the roof to be put in the garbage.

Ice and Water – Ice and water comes in many different brands and qualities. In order to receive a GAF 50 year full coverage manufacturer’s warranty you will have to use high quality name brand (GAF) underlayments. This complete roofing system is required by almost all shingle companies to receive their warranties. Shingle manufacturers do this because they know that their shingles will last a few years longer than roofs installed with poor quality underlayments. This means that if the roofers show up with a box of ice and water and the packaging doesn’t match the branding on the shingles. Your roof will most likely not be covered by a full coverage manufacturers warranty. The low bidding roofing contractor will tell you that you’re getting a manufacturer’s warranty and then show up with underlayments that cost about a third as much as the name-brand materials, saving the roofer around 500 dollars on your average sized roof. The contractor will get away with this one a lot as well because there usually is no one home checking to see that the right materials were used. Most often home owners do not even know to look for the difference in these materials. Using a roofing company that is certified by a shingle manufacturer will help prevent the use of lower quality underlayments.

A lot of these contractors will be sneaky with how their contracts are worded and will be sure to cover themselves if they are found out. If the specific materials are not called out in the contract, then these shady companies are not held liable for the roofing system they might have told you that you were receiving. This is why it is wise to make sure any and all materials are specified in the quote.

Precautions You Can Take

Get a thorough quote.
Say no to any contractor that asks you for all the money before the job is finished.
Always ask for an invoice/receipt.
Check the contract over thoroughly.
Watch the materials that are delivered.
Check the material brands listed on your quote/receipt against those that actually arrive.
Count the plywood that arrives and count how much is actually used.

Summary

As you can see, the roofing trade can be a very cutthroat business. There are so many underhanded tactics a roofing company can use to extort money from you. By arming yourself with the knowledge of some of these nefarious techniques, you can make yourself a much harder target. Most importantly, get everything written down and never rely only on verbal agreements. Whichever company you go with, we wish you all the best. Nobody deserves to be scammed and those disreputable companies definitely do not deserve your money.