Infinite Roofing | Infinite Roofing & Construction Roofing Blog

Commercial Roof Maintenance

November 1, 2019 by Infinite Roofing Leave a Comment

Many people might ask themselves why they should maintain or how they should maintain their commercial roof. Well, preventing any problems that would require an emergency roof repair or replacement would be the best way to take care of your commercial roof. Taking care of your roof before the winter comes means that it will be in the best condition for the rest of the year. When your roof gets the proper maintenance, it helps it fair better during storms and extreme weather, which means there would be less of a chance of getting any leaks or other elemental damage. When something serious goes wrong with a commercial roof, such as severe weather damage, unforeseen circumstances, or lack of routine maintenance and routine inspections, this can cause an entire section of a building to be shut down. This is terrible for any commercial operation! Especially one that has business going on constantly. Therefore, any business, especially one that has a large amount of square footage dedicated to a roofing system, should have their roof maintained properly. Maintaining every part of your commercial roof is a key duty of the facility manager. Regular roof maintenance is essential to ensure the total integrity of the building, however, knowing how to approach it is a big responsibility.

Roof Warning Signs

A properly designed roof provides structural support, fire resistance and more. A minor issue like a tear in the outer layer or warped asphalt, sealant could pose a risk. Therefore, when hiring an experienced professional roofer they should do a routine inspection. During a routine inspection, they could look for some of the following warning signs.

Having bubbles or blisters on your commercial roof is a definite warning sign that should be taken care of as soon as it’s spotted. An improper roof application is typically a leading cause of roof blisters and bubbling. Bubbles appear on your roof when there is moisture that is trapped under the roofing materials, where the water evaporates, and the result is usually the formation of bubbles or blisters.

Your roof shouldn’t be uneven, simply for the fact that a roof is built to bear its own weight. If you happen to notice any part of your roof sagging, then contacting a commercial roofing contractor is your best bet so that they can look at your roof and determine what actions should be taken. A sagging roof could be caused by many different issues, among them, being accumulated moisture, additional weight on the roof due to the installation of new roofing materials on top of old ones for a long time and other factors.

Excess standing water also known as ponding is very dangerous for your roof. Standing water is defined as water on a roof that hasn’t been drained or evaporated within the 48 hour period after rainfall, flooding or any other causes. If it hasn’t evaporated within that period, you can be expecting it to remain for an extended period of time. The accumulation of standing water on a roof over time can lead to dangerous defects which would include leaks that may eventually allow hazardous mold to grow on your roof surface. When the standing water has been on your roof for a while it can begin to cause sagging, thus creating a larger dip/pool to hold yet more standing water. Once you get standing water, it often creates a vicious cycle that ends with roof repairs or even full replacements to counter the damage caused.

Regular Routine Inspections

Many commercial roofing companies recommend that facility managers, or their local roofing contractors perform a routine inspection of a roof twice per year, usually once in the spring and again in the fall. This will allow you time to address any concerns before bad weather could cause an issue or make any issues worse. It could be tempting to do the roof work yourself and you might even be lured into thinking that any roofing contractor is qualified for the job. However, hiring the wrong commercial roofing company will lead to more expense and wasted time correcting any issues they have caused. When hiring just any roofing contractor, they could be using inadequate materials or they could get injured while servicing your property. This can cause invalid warranties and cause your insurance costs to skyrocket.

An experienced commercial roofing contractor would be able to find any signs of a leak or any other type of damage. They would be able to pinpoint any loose materials that need to be replaced, overhanging branches that would need to be trimmed, along with any dirt and debris that would need to be cleared off. Hiring a professional commercial roofer, they would be able to visually survey the total roof system and check all the flashings, fittings and other roof-related accessories. Any blockage to drains or downspouts should be checked in order to prevent adequate water drainage. A routine commercial roof inspection would look for gaps or tears in penetration and flashings, proper seals on all rooftop vents and equipment, and any other signs of damage.

A proper commercial roof inspection would cover counter flashing as well. The purpose of counter flashing is to prevent moisture from entering behind the vertical flange of the headwall or sidewall flashing. Usually, the material covering the exterior wall serves as the counter flashing and often a separate slip metal flashing would be installed under the counter. Counter flashing is important mainly when it comes to brick walls. When properly installed, counter flashing sections are inserted into the mortar joints. Afterwards the joints would be sealed with an appropriate sealant. Counter flashing is also inserted into a groove cut into the brick, and then it is sealed.

During your routine inspection, your local commercial roofing contractor would conduct an interior and exterior exam. When conducting the interior inspection of the roof, you would be looking for discolored or water-stained ceiling and walls, raised or deteriorated areas on the wall, discoloration or water staining around window frames. There could also be rust or other deterioration of the roof decking, joists or other structural components, as well as mold on any interior surfaces.

With the exterior of the building, on the other hand, there could be excessive standing water on the roof’s surface that would most likely be caused by structural failing, broken purlins, broken joists, loose/buckled flashing or damage to the roof membrane. There could also be materials stored on the rooftop that should be stored elsewhere. You would also have to look for nails or screws in the roof deck backing out of the roof membrane, debris on the roof or in the drains and gutters, missing domes on drains and defective, damaged or missing masonry joints.

Maintenance Program

The most trusted providers of commercial roofing or re-roofing services often offer a commercial roof maintenance program that has a comprehensive plan. Proper maintenance can extend the roof’s life and reduce potential damage to the building’s interior, protecting one of a company’s biggest assets, their building. When setting up a commercial roof maintenance program, the recommendation is that once every two years you have a plumber check all the roof drain lines. For a comprehensive commercial roof maintenance program, you should create standardized documentation for each building that is being inspected to help maintain proper records. With that documentation, there should be a file for each roof, including the roof’s installation dates, records of repairs and updates, a map of any current leaks and every time roof maintenance is performed.

Proactive Vs. Reactive Roofing Maintenance

In order to know if proactive or reactive roofing maintenance is something that you want to go with, you should know what exactly they are. Proactive is to take control of the situation by actively preventing something from happening rather than responding to it after it has happened (reactive). On your roof, being able to spot minor problems before it becomes a bigger issue with a larger price tag, taking an active role in the maintenance of your roof by performing routine inspections and keeping up with minor repairs.

Reactive maintenance always happens after the fact. This simply means that the maintenance work and repairs aren’t addressed until there is very obvious evidence that a problem is present, such as missing shingles or water leaking into the home. Unfortunately, with reactive maintenance, warning signs of potential problems are often missed. The result is that damage and repairs often end up being more extensive and costly than they otherwise would have been. Many owners take an “out of sight out of mind approach” with their roofs. However, taking a proactive maintenance approach over the reactive maintenance approach not only extends the life of your roof but provides significant cost benefits.

Facility managers who choose to react to problems as they occur would generally pay an average of 25 cents per square foot annually for maintenance. On the other hand, facility managers who get their roofs inspected and repaired routinely before problems happen will spend less than 25 cents annually. Proactively maintained roofs last an average of 20+ years compared to an average lifespan of 13 years for reactive maintenance. The longer you can extend your roof’s life before replacement, the greater your total savings will be and the chances of a roofing disaster occurring on your property will decrease.

Best Time for Roof Installation?

October 25, 2019 by Infinite Roofing Leave a Comment

Typically, asphalt roof shingles should be installed between 50 degrees and 80 degrees Fahrenheit. Even high quality asphalt shingles can crack when hammered, and when installing in the wrong temperature can cause breakage. This is one of the biggest problems when you install asphalt roof shingles when it’s under 50 degrees (no lower than 45 degrees). With that said, winter is often a great time to get a good deal on a new roof but your local roofing contractor will need to wait until the temperature is in the right range before scheduling an installation date.

Routine roof maintenance and periodic replacement by your roofing contractor are important for maintaining the structural integrity of your home. Your roof defends your structure from the elements and keeps you and your family safe. Leaks and poor construction can cause severe damage, including improperly-channeled water runoff that erodes the foundation of your home, water ponding on the roof that can cause sagging and leaks, and even paint damage to the exterior walls of your home.

Whether you require minor roof repairs and/or a complete roof replacement, the question is, which season is best to make the call to your local roof installation and repair contracting company?

The best time of the year to have your local roofing contractor install your new roof may not be what you think. Let’s try to determine the best season!

Winter

Snow, ice, and sleet in the winter months make it difficult to have roof work done—especially a complete roof replacement. In the frigid Northeast, (like here in Albany, NY) sealants will not adhere as effectively during winter, and roofing shingles will take much longer to set. For this reason, most roofing contractors will recommend that you wait until the temperature rises to have roof work done, unless it’s an emergency situation that you will not want to run into.

Spring/Summer

Although there might be a fair amount of rain during the spring and summer months, overall the weather is typically better during these seasons. Your local roofing contractor will agree that weather is of course a huge consideration when it comes to roof work. Spring and early summer are typically the most cost-effective times to have your roof repaired or replaced, as it is generally a slower season for local roofing companies, and materials and labor costs tend to be lower. Most local roofing companies tend to pick up later into summer, so then you may have to wait a few weeks or a month to get a roofing contractor out to your home. Please be mindful that temperatures and humidity levels may soar in late summer, which could limit the amount of time workers can spend each day on the job and possibly add several days to the project.

Autumn

Most local roofing contractors will say Autumn is ideal to have roof work done. The weather is not severely hot or humid, and the heavy downpours of rain have not yet begun. Roofing contractors can work full days on your roof without the threat of heat exhaustion or freezing. This means they can get the job done much more quickly, limiting the inconvenience to you and your family. Another benefit of installing a roof in the fall is the impact on the roofing materials. I particular, shingle roofs need time to seal and create an airtight barrier. Frigid temperatures in the winter months or heat and humidity in the summer make this process more difficult. Autumn can be thought of as the “Goldilocks” season: Not too hot, not too cold, it is just right. Having roof work done in the fall also eliminates any additional stress. You would not have to worry about whether your roof will make it through another winter season without major issues.

Is Replacement needed?

Your local roofing contractors will agree that a very common error homeowners make is putting off their roof replacement even when it’s long overdue and there are already signs of problems. As mentioned earlier, a major leak or storm could cause severe damage to other parts of your home and creating a big financial mess. Roof replacement is a notable expense, but also a significant investment in your home. Roof Replacement helps preventing secondary damage, it adds to your property value, and provides you with peace of mind. Replacing your roof before an emergency arises allows you the time to research your local roofing companies and make an informed decision. Please do not wait until it’s an emergency to have your roof repaired or replaced! Planning ahead is always the best choice.

Finding Roof Leaks

October 10, 2019 by Infinite Roofing Leave a Comment

Leaking roofs can become a challenge for many homeowners. It happens in the most inconvenient times and they can lead to significant damage to the interior of your home. The effects of leakage can linger long after the repair has been made in the form of mold growth on the interior surfaces of your home. Sometimes trying to figure out the source of the roof leak can be much more challenging. Mainly for the reason that the source of the leak on the outside of the home rarely matches the leak that appears on the inside of the home. Therefore, leading to frustration for the homeowner who is attempting to repair it. Locating the source of a roof leak is definitely not an exact science. It’s more of a process of elimination since a roof leak can happen for many different reasons and there is not always a direct result of one specific problem associated with your roof.

Identifying Roofing System Leaks

When there are signs of water damage or dripping water coming from the ceiling that is directly below an attic space or directly below the roof surface itself, the true cause is most likely a hole or some type of damage in the shingles or other roofing material that makes up the roofing system. When there is active water dripping, it might come out brown or dirty when it’s coming from your roof. This is happening because the water that is making its way into your home is picking up dirt and impurities on the way. During the winter season, if your ceiling is leaking or seems damaged it could be the presence of ice buildup along the eaves of your house. This means that more than likely, you have ice dams that are causing the water to back up under the shingles and down onto the ceiling. Ice dams mainly appear on the edges of the roof so the leaking would often be near the edge of the room or even on the surface of the walls, since the water may be dripping directly down into the walls.

Causes of Roof Leaks

As stated before, leaking roofs can happen out of nowhere and they can become extremely frustrating. They can happen on a newly installed roof or an aged one. Roofing materials such as shingles get old and worn. The change in temperatures can cause an aging roofing system to turn brittle and eventually crack. During the summer weather, the harsh rays from direct sunlight can melt the tar that holds the composition of the shingles together within a number of years.

Brick chimneys may seem indestructible, however, what binds the bricks together is a working mixture of water, sand, and cement. When exposed to natural weathering it can gradually be destroyed and crumble over time. Therefore, you should check the mud cap on top of the chimney for any deterioration. If you have a chimney, flashing is one of the most common issues on a roof. Flashing is thin strips of metal that are installed at a danger point for leaks around a roof. Chimneys are bent at a 90-degree angle in order to attach to both the roofing material and the brick of a chimney. When it comes to flashing it needs to be properly sealed to protect against water intrusion. It also needs to remain nailed in place because the metal can rust and crack.

Clogged gutters are another cause of leaking roofs. The reason being that gutters are meant to prevent any water from building up in your roof by leading the water into the downspout and out away from your home. Therefore, when your gutters are clogged it becomes a problem. Especially if it’s left untreated for a long time. When the gutter is left filled with water it starts to cause the gutter and metal sides of the roof to rust, making it weaker as each day passes and making the gutter more prone to tearing a hole in the entire roof. The wooden part of your roof starts to develop mold, fungus or eventually it would start to rot because the roof was left soaking in water. When that happens in a matter of time the underlying material and ceiling end up affected and bringing leakage. Water more than likely would seep into the insides of your home.

Attic condensation can cause roof leaks as well, especially during the winter. Attic condensation is uncommon, however, some people may mistake ice dams for attic condensation during the winter. Homeowners might call their local roofing company and have the ice dams removed and yet still have continuous leakage. In that case, the issue would most likely be attic condensation. The problem would stem from water vapor from inside your home, making its way into your attic. When that warm vapor cools, the moisture starts to combine into big, damaging droplets all over the wooden surfaces in your attic. When that happens it eventually causes enough condensation that causes visible leaks and other problems.

Finding Roof Leaks

Leaking roofs are caused by numerous things and trying to find where the leaks are coming from can be an easy situation, but it can also be one of the most difficult things to find. Going up to the roof is one of the first things to do in order to track down the cause of the issue. When looking, be sure to look for any roof penetration. The reason is that items that penetrate the roof are the most common cause of leaks. It’s pretty rare to have any leaks from uninterrupted shingles, even with older roofs. Penetrations can occur from roof vents, chimneys, or anything else that projects through the roof. If you have an attic, the easiest way to find a leak is to go up with a flashlight and look for the evidence. There definitely would be water stains, black marks, or mold. However, if there is an issue with getting into the attic your best bet is to go up the roof and examine the issue. Sometimes there are leaks that are difficult to find, however, you can find it by first having someone help with a garden hose on the roof. Start by soaking the area above where the leak appears in the house. However, if the water doesn’t seem to reveal with that method, start removing shingles in the suspected area. Doing that would provide evidence of the leak and therefore you would be able to track it right to the source. You would be able to see some discolored felt paper or water stain or even rotted wood directly below and around a leaky roof.

If you have an attic and you’re looking for leaks you can use a flashlight and point it toward the underside of the roof. The light would reflect when hitting the water, making it much easier for you to see any water. The flashlight would also help you see any punctures or holes in the roof.

Finding Flat Roof Leaks

Compared to all other leaking roofs, finding the source of a leak on a flat roof can be quite challenging. Water travels in a downward motion which helps provide some clues to where you can locate a sloped roof leak, however, with flat roofing the water can travel in any direction. In order to determine exactly where the leak is located, getting up on the roof to examine it in dry weather is your best bet. You can inspect the flat roofing surface for any signs of a leak such as a low spot surrounded by a dirt-stained ring which is from a pooling of water. This is what is known as a dry puddle. These are very very common on flat roofs. Once you find a dry puddle you will often be able to find the leak, right there in the center.

Another common cause of flat leaking roofs is flashing which is the same for any other roof. Flashing is thin pieces of sheet metal, or sometimes a different material, that is used on steep angular joins on raised or protruding areas of the roof, like chimneys. It is used to help seal, waterproof and prevent any water from entering the premises. Flashing can peel and crack as well as get holes. Therefore, that is something that should be checked in order to avoid any leakage. What can also happen is when we have periods of intense heat over the years, the top material can start to bubble up and develop a crack making it another potential source of a leak. In order to make sure the area that you suspect is the source of the leak, just like other leak tests, take a hose up to the roof and spray the area before returning inside to see if the water drips inside near the spot, or you can have a friend help you with this. If this is something that you feel that you wouldn’t want to do yourself, local flat roofing contractors are your best bet. Many commercial roof repair companies have well trained flat roofing specialists that know exactly how to get the job done very efficiently. Therefore, hiring local flat roofing contractors would be a lot more convenient than you and your friend doing it yourselves.

Roof Leak Repair

Some people would rather repair their own roofs when they have leakage. However, the safest way is to contact local roof repair companies. Roof repair companies have a specialist that would repair any damages. As well as for the fact that they are trained in roofing they would know the cause and be able to give you the right information and prevent any future leaks. However, if a roof repair company is not something you would want to go with, fixing it yourself would be the way to go. Roof leak repair is not an easy job, it requires some steps. That is why we recommend when it comes to a roof leak repair to go with a roofing company.

Remember that there could be more than one source of the leak which could be leading water into one low spot underneath the roofing material. Any other issues of repair that happens to be identified during your examination, whether it’s not resulting in a leak yet should be repaired sooner than later. Just so that any future problems can be avoided and become less of a hassle for you as a homeowner.

Roofing Safety: Roof Safety Tips

September 13, 2019 by Infinite Roofing Leave a Comment

Roofing Safety Tips — Infinite Roofing and Construction

Based on OSHA’s fall prevention campaign, they summarize the proper roofing safety practices as “Plan, Provide and Train”, which is something that Infinite Roofing provides to all our work crews. This simply means:

Plan – In order to get the job done properly, roofing contractors need a roof safety plan for each worksite, making sure that they have the proper equipment, material and having the appropriately trained workers. Also, the contractors knowing the pitch of the roof and following the appropriate procedure for a low or steep slope roof. Doing this provides a better and thorough roofing safety plan.
Provide – Roofing Contractors must be trained to have the right pieces of equipment, such as the types of ladders, scaffolds, and safety gear.
Train – Roofers must be trained on how to use each equipment that is used for the job. They must be trained in hazard recognition as well as the care and safety of ladders, scaffolds and other equipment that they will be using on the job.

Fall Protection Requirements

Falls are very common when it comes to roofing, they are a leading cause of work-related injuries and deaths to the workers. When a roofer is working six feet or above, this puts each roofer at risk of serious injury or even death if they were to fall. When it comes to Infinite Roofing we focus on those dangers and make sure that we avoid the lack of fall protection or the improper setup that will increase their risk of falling from a height.

Fall Protection Training

Commercial roofing contractors must provide fall protection training for all workers who would be exposed to the chances of falling. The training must be conducted by a person who is competent and has good knowledge within the roofing industry. The information that would be provided should include information on how to recognize fall hazards and the procedures to follow in order to minimize the chances of serious incidents occurring. As a professional roofing contractor, Infinite Roofing always ensures that all our workers follow all steps to ensure they stay safe.

Roofing Safety Practice and Equipment

The best commercial roofing company to hire is one that focuses on safety and is aware of the following:

Ladder Safety & Placement: An experienced Albany roofer will have the proper ladder lengths so that it could be placed against the house at a safe angle. They would also make sure that the ladders are inspected by a competent person for any visible defects on a regular basis. They would take extra care that all footing of the ladder is secured and that the top is tied to prevent any slipping or shifting.
Safety Equipment: Other safety equipment should be used when it comes to roofing, such as using a guardrail system, scaffolding, and fall arrest systems that would include anchorage, safety harnesses and safety lines.
Safety Practices: In the demolition phase, roofing contractors should always protect their workers on the ground from falling debris by controlling how it leaves the roof. According to OSHA, wearing appropriate footwear is a piece of important protective equipment and critical during roof demolition. Workers should also be careful with air hoses and power cords when using nail guns and other electrical equipment.
Training: Roofing is a trained skill that also requires experience to fully master. Therefore, a good contractor will make sure that all their workers have been fully trained in each practice and are completely up to date with any new safety guidelines and standards. The employers must appoint a qualified person to train workers. They need to be provided with ongoing safety training that focuses on that specific type of worksite as well as general roofing safety training. Employers must also appoint a competent person to train workers who construct, disassemble, repair, inspect scaffolds to recognize any potential hazards. Training should also be provided in a language that the workers being trained can understand.

Roofer Tool Safety

When roofing it all comes down to the tools that you are using, therefore, power tools and equipment that is used can be extremely hazardous and can cause severe injuries if used incorrectly. Furthermore, employers can reduce the risk of injuries by simply providing the correct tool guards and trained workers. Which makes a huge improvement in the roofing safety plan.

Power tools such as nail guns, saws, etc. should have the proper shields, guards, or safety attachments that are specified by the manufacturer. Employers must also ensure that each worker using power tools is wearing appropriate eye protection. Therefore, every local roofing contractor should replace a tool guard that is missing or has been damaged in order to provide safety for their workers.

All workers must be able to properly use each tool and that they are properly trained. It is very important to discuss tool safety features, safe operating procedures, and work practices, such as proper body placement. Roofers in Albany must ensure all procedures are carefully followed when it comes down to each tool that is used.

Personal Protective Equipment

With any construction job, every local roofing contractor has a duty to protect its workers from hazards and injuries. However, where the hazard cannot be eliminated by other types of controls such as engineering or administrative controls, the local roofing contractor must ensure that workers wear the appropriate PPE.

The typical PPE used with various roofing tools and equipment is nail guns, generator/air compressor, shingle stripper, tin snips, power saw, etc.

Nail Guns: When using a nail gun, workers must wear protection (particularly eye protection), in order to prevent the nail gun from causing severe, irreparable injury. Also, always avoid carrying it against the body or with a finger on the trigger.
Generator/air compressor: It’s important to wear eye protection and other protection while working near any pressurized equipment.
Shingle Stripper: Always make sure you’re wearing the proper footwear and eye protection.
Tin snips: It’s extremely important to wear work gloves and safety glasses when discarding waste or any scrap metal.
Power saw: Making sure you’re wearing hearing protection, eye protection, and work gloves. Ensuring that guards are placed and functioning properly.

Weather Conditions

During the fall and winter time weather conditions can become very hazardous. Especially when it comes to the high winds, wet weather, and icy conditions. Roofing safety plans become importance at that point. Therefore local roofing contractors should consider suspending any operations in bad weather. Mainly when working on any type of roofing surface that could be slippery when it’s wet, which includes slate, tile, metal roofs. Furthermore, as local roofing contractors, we always do our utmost to promote safety and avoid working in serious weather conditions.

Why is a Fall protection Harness Important?

In order to prevent any falls, using a fall protection harness is the way to go. As mentioned before, falling while working on any roof is one of the most common reasons for roofer injuries. Therefore, when a harness is being used it is carefully engineered to work alongside the lanyard, rope-grab, rope, and roof anchor. Roofers in Albany, such as Infinite Roofing, always make sure that all our workers wear the right equipment, especially harnesses to prevent any serious injuries.

Safe Debris Disposal

All local roofing contractors must consider worker and bystander safety when it comes to selecting a method for handling debris, which is scattered pieces of remains or waste. A common cause of debris from a roof is the removal of old roof shingles before working on a new roof installation. When debris is not managed properly it can result in a trip hazard and contribute to falls. An effective method that professional roofing contractors can use to manage the remains or waste that is on the roof is to use a forklift to raise a collection box to roof level. Therefore, when the box is full, or when the job is completely done, the box would be lowered to the ground without any of the contractors being put at risk. Another common method is to thoroughly cordon off the area where the work is taking place to ensure that nobody wanders into a dangerous area by mistake.

To sum it up

Knowing all safety guidelines and procedures can be very involved and it is very important that local roofing contractors know all safety requirements before they hit that roof. Being properly trained, forming a roof safety plan and knowing what makes each worker safe will make a hazardous job so much safer!

Tips: End Of Summer Roof Maintenance!

August 9, 2019 by Infinite Roofing Leave a Comment

As summer slowly comes to an end and the blazing hot sun is in full gear. Many homeowners are engaging in as many outdoor activities as they can. Like going to the beach, relaxing on their back patio, or grabbing some propane to spark the grill. Hardly anyone is thinking about climbing up a ladder to check in on their roof. During the winter months, the roof has protected you from cold and wet temperatures and now it’s time to for a little roof pampering.

A majority of homeowners believe Fall is the best time to call their local Roofing Contractor to take care of the roof, but roof maintenance is a year-round activity. Summertime is the best time to start as any. Summer brings a bit of challenging weather conditions, including high temperatures, humidity, torrential rain, thunderstorms, and heavy winds.

Taking time to perform a quick evaluation assures your roof can withstand summer heat and storms, is in good operating condition, and maintaining the structural integrity of your home. Just like any other part of the house, the roof requires regular maintenance to keep it functional. Though in theory, you can inspect your shingles from the ground with a pair of binoculars, maintenance should be up close and personal. Please do not hesitate to contact your local roofing contractor. Should you require a local roofing company, Infinite Roofing is here to help!

Should you decide to tackle this by yourself, please be sure you are following the safety tips listed:

Always use proper safety equipment such as a sturdy ladder, a hard hat, eye and face protection, and a harness.
It would not hurt to bring another person along as a precaution.
Be sure you are aware of where you are stepping to avoid an unwanted accident and/or roof damage.

To get you started, here are few roof maintenance tips to help this summer:

1. Gutters and downspouts cleaning. Water always finds its way, so clearing any debris that could potentially clog gutters and downspouts is essential to roof maintenance. Preventing water from flowing to places where it shouldn’t prevent damage to substructures beneath the shingles and under the foundation

2. Trim away overhanging branches. Tree branches that hang over the roof offer a highway to heaven–or a warm, dry home– for small birds, squirrels, and other rodents you may not want living in your home. Tree limbs and branches are a common cause of roof damage but can be easily prevented by trimming away any large tree branches that could snap due to the wind, heavy ice or snow or even disease and decay. During the warmer months, you will notice more debris on the roof from leaves and dust from small branches and pine needles. Prompt bris removal is critical for a long-lasting roofing system.

3. Moss Removal. While trees may provide shade when you want to relax out front on a hot summer day, shade also means added moisture. A roof that does not get much sunlight in the rainy months is also at risk of moss growth. Be sure your local roofing contractor monitors your shingles for signs of moss, mold, or mildew growth and remove it immediately if spotted. Some moss killers may cause discoloration and/or damage roofing materials. Roofing contractors will guarantee the use of safe chemical moss killers.

4. Replacing damaged and/or missing shingles. Most roofing contractors agree that a roof can last between 15-20 years. It also depends on if the old roof was removed and there is only one layer of shingles, and if it’s ventilated properly. Keep in mind, if a roofing contractor has installed a roof over an existing layer or several layers, and it is older than 15 years, chances are you’ll most likely need a new roof. Shingles that are buckling or curled are another sign that you may need a new roof.

5. Repair broken flashing and damaged seals. Sealing and flashing are essential components in your home’s battle against moisture. If there is any penetration through the roof, there is the probability that the flashing and seal directing water away from the hole will fail. Check roof penetrations and repair leaks immediately to prevent further damage. Your local roofing contractor can help you determine the state of your flashing and sealing and can advise you as to whether or not repair or replacement is needed.

6. Blocking animals from entering the home. Four-legged pests such as rats, raccoons, and squirrels will gladly accept an invitation to move into your attic, ruin insulation with urine and feces and/or chew through electrical cords and cables. Use an industrial cloth or any other means to block access through roof vents and other openings.

To Sum It Up!

End of maintenance can be a bit intimidating, especially for new homeowners so if you’re unsure of what to do or just don’t have the time to inspect your roof yourself, make arrangements for your local roofing contractor. They can help you spot problems before they develop into costly repairs!

Roof Decking: Rotting & Corrosion

July 18, 2019 by Infinite Roofing Leave a Comment

Owning a home is one of the most challenging, yet rewarding responsibilities a person can have. You get the chance to establish a sanctuary for you and your family that provides the protection and comfort you desire. However, this can all be put at risk when you begin to notice issues with your roof such as a couple of wet spots on your ceiling. This may be your first home and may have never even looked at a roof’s foundation before let alone knowing where to begin. You go up to your attic to investigate, and come upon a distinct musty smell of mold. Signs would point to a roof leak, and one of the main causes usually would be roof rotting or roof corrosion if you own a metal roof. What do you do? You may not be an expert in roof contracting, but that is why certified experts like us at Infinite Roofing are here to help you get back to living with the protection and comfort you deserve.

What is Roof Decking?

When talking about roof rotting, we are talking about the roof decking or sheathing of the home. The roof decking plays a pivotal role in determining the safety and structural integrity of your roof.

Roof decking is the foundation of your roofing system. It is the base layer that connects the roof to the home. The roof deck is placed between the structural components, such as the trusses and joists, and the insulation/weatherproofing layers. When it comes to your roof rotting, you want to take all the steps necessary to ensure the health of your

Roof Decking Materials

Roof deck materials come as 4 x 8 sheets in a variety of different material options. The most common type of roof deck material is plywood, which comes as either OSB (Oriented Strand Board) or CDX (C to D Exposed). Other roof decking materials include steel, concrete, and cement. The main determinant of the type of material you should use is based on the amount of weight that the roof deck will need to carry, plus the weight of air conditioning equipment, rain and snow. For most residential projects the common choice of roof deck materials are OSB or CDX plywood. For commercial projects, steel, concrete, and cement are more commonly found in the roof deck. These materials are definitely interchangeable depending on your project requirements, however for now let us focus on three main materials; OSB, CDX, and steel.

OSB Plywood

OSB (Oriented Strand Board) was originated in the late 1970s as an extended use of waferboards. It separates itself from other wood-scrap materials because the long strips of wood are placed strategically instead of randomly, hence the name “oriented” because the wood strips are oriented strategically to improve the strength qualities from the waferboard. OSB Plywood is made from heat-cured adhesives and rectangular-shaped wood strands that are arranged in cross-oriented layers. Because OSB uses small wood strands for production, it is considerably less expensive than standard plywood. When produced in large, continuous sheets, the OSB is a sold-panel of consistent quality with a few voids or gaps. OSB Plywood is more susceptible to absorbing moisture and swelling up than CDX, due to the release of compaction stress in OSB created during the pressing of wood chips into the panels. Swollen OSB will remain permanent, to a degree, causing leaks, increasing decay, and creating uplift of whatever materials lie above.

CDX Plywood

CDX (Class C to D Exposed) Plywood is the lowest class of plywood and is often used in the construction industry or as a base to create other materials. Plywood is made from thin layers of wood that are peeled from a spinning log, called veneers, that are cross-laminated and glued together with a hot press. Throughout the thickness of the sheet, the grain of each layer is laid perpendicular to the adjacent layer. The final product is an odd number of layers so that the balance is maintained around the center. Since CDX is made from whole layers of logs as opposed to small strands, the plywood is much more consistent and has a less rough appearance than OSB. CDX is lighter than OSB, retains nails and screws better than OSB, and produces less swelling when exposed to water and will return to its normal thickness after drying. This feature alone is enough for roofing contractors to prefer using CDX Plywood over OSB for their roof sheathing.

Steel

Steel or Metal Roof Decks have been around since the 1930s/40s. The Steel Deck Institute (SDI) has been the biggest force in setting the standard when it comes to the design, manufacture, quality control and construction practices applied to cold-formed steel decking. The steel deck is roll-formed from structural quality sheet steel and is made to span over the roof joists or purlins to provide a flat surface to apply the weatherproof roofing. The variations in its thickness, shape, and depth can be used to meet the variety of loading requirements and spans. The steel deck’s versatility also allows for it to be used in more unusual configurations that may be sloped or curved. Steel decks are usually more costly than materials like plywood however, they provide increased longevity, durability, and a better strength-to-weight ratio backed by years of proven satisfaction in the roofing industry. Steel decks are more commonly used for flat roofing systems, which are typically used for commercial roofing projects.

How Can I Tell When My Roof Is Rotting/Corroding?

As a homeowner, you want to do anything that you can to keep your home safe from the elements of mother nature. Your first line of defense is your roof, so how can you tell when your front line is starting to deteriorate?

First things first, is it even safe for you to check your roof? We do not recommend grabbing a ladder and going on your roof to do an inspection. According to the American Association of Orthopaedic Surgeons, last year there were about 500,000 ladder-related injuries due mainly to homeowners trying to clean out their gutters or perform their own roof inspections/repairs. Our team of certified roofing contractors have specific equipment and years of experience in doing roof inspections safely and thoroughly and will provide a free, no-obligation estimate for any repairs or replacements needed.

With that being said, there still are some telltale signs that you as the homeowner can check for yourself to see if an estimate would be needed.

Roof Rotting

Here is a list of signs that your roof deck may be damaged or rotting:

Shingles curling, cracking, or buckling
Missing shingles
Holes in the roof
Mold or mildew in the attic
Spongy feel when walking on the roof
Granular wear to shingles
Damage around chimneys, pipes, and other penetrations to the structure.
Wet spots on your ceiling
Sudden increase in electric bill

There are some DIY inspections that you as a homeowner can do to find the beginning signs of roof deck damage.

Attic Inspection: Carefully make your way up to your attic and check for any signs of rotting wood. Do you see any signs of staining or moisture on any of the plywood or insulation? Can you feel any dampness in the wood? Is there a musty mold smell lingering? Can you find any holes, possibly made by a new furry neighbor? Is your attic fan and ventilation system free of dust & debris and circulating the air properly?
Ground Check: You can take a trip outside and stand in front of your home to view your roof from the outside. Are there signs of curling or missing shingles? Can you notice any sagging or structural integrity issues with your roof?
Research Roof’s Age: Severe weather or a poor ventilation system can decrease the life expectancy of your roof. If your roof is more than 20 years old, it’s a good idea to reach out for a professional roof inspection.

Roof Deck Corrosion

Roof deck corrosion occurs when using steel for your roof deck construction and has been exposed to water either from a hole created from severe weather or poor roof or insulation installation causing gaps between the roofing and insulation and allowing for water exposure.

WARNING: We do not recommend walking on a damaged metal roof structure. Corroding metal roof decking can cause structural instability which can lead to the roof collapsing if too much weight is put on the structure, leading to injury. Please refrain from having work done on units on your roof if you suspect instability in your roofing structure.

Some visible signs include:

Visible rusting in roof deck
Pieces of roof deck missing or falling from structure
Wet or damp insulation
Holes/leaks in roof

If you believe that your metal roof decking may be damaged, immediately have a professional roofing contractor, e.g. Infinite Roofing, come do a thorough and safe inspection of the roof.

So What Do I Do? Repair or Replace?

Rotted or corroded roof decks, whether made of plywood, steel or any other material, cannot be repaired and must be replaced. Contact your local certified roofing contractors and set up an appointment to have the damaged roof deck to be replaced.

Our professional roofing contractors here at Infinite Roofing would replace the rotted roof decking, along with the top of the line GAF and Versico accessory products to help prevent further roof deck rotting or corroding such as:

Lifetime Roofing Shingles
Proper Attic Ventilation
Proper Roof Deck Protection
Ice & Water Barriers
Starter Strip Shingles
Ridge Cap Shingles

Adding these top of the line products will increase the longevity and durability of your roof decking. When it comes to protecting the welfare of your home and family, you want to have the best certified roofing contractors and products out there. Here at Infinite Roofing, that is exactly what we intend to provide for you.

Metal Roofing Vs Shingles

July 5, 2019 by Infinite Roofing 2 Comments

Where you live is more than just a basic shelter. The roof can be what makes the difference between a house and a safe, secure home. A roofing system should fit the structural design, protect you from the elements, and insulate you from the cold of winter and the summer’s heat. We will discuss the difference between metal roofing systems and asphalt shingles, so you can pick which one would be a better choice for your home.

Varieties

Metal roofing systems come in a variety of styles, largely dependent on the metal used and coatings applied. Aluminum is a metal that needs no coating. Steel, on the other hand, requires specialized treatment to prevent rusting. Other options for your property are zinc, stainless steel, titanium and copper roofing.

Asphalt shingles come in two varieties, the traditional organic ones and the newer fiberglass shingles. The difference is in their layered make-up. There is a 3 core fiberglass covered with an asphalt layer in the fiberglass shingles and the organic shingles have a heavy felt layer under the asphalt.

Roofing Materials - Choose the right look for your property

Appearance

The layered look of asphalt shingles is by far the more popular of the two types. The vast majority of homes in the United States has asphalt shingle roofing, largely because asphalt is the material most builders trust and what homeowners are accustomed to seeing on houses. Asphalt shingles can vary in colors to match the paint or brick of a home, and the variety of their colors is more than with metal roofing. The three-tab shingles give a flat appearance while the more expensive architectural shingles appear more three dimensional.

Metal roofs are rarely seen in urban and suburban areas. The sleek, metallic appearance seems more suited for an agricultural setting. Metal roofing systems are available in a variety of colors and styles to match the rest of the home. The metal can be in panels, tiles, or shingles, but the appearance of a metal roof still can be jarring in a neighborhood full of asphalt shingle roofs.

Installation

Metal roofing installations are much harder than installing a shingle roof, but due to the weight of shingles, especially the traditional ones, the previous shingle materials may need to be removed first. Also, warranty and insurance requirements may demand the removal of previous asphalt shingles. A roofing square of three-tab shingles, which is 100 square feet, can weigh 200 pounds, and a square of architectural shingles can weigh up to 500 pounds. Because the installation is easier, even with removing a previous roof, installing asphalt shingles can take as little as a day or two of labor, depending on the size of the house.

Metal roofing, on the other hand, is much lighter and can be installed directly over the previous roof. The weight varies by the material used. Aluminum weighs only about 50 pounds per square while steel weighs 100 to 250 pounds. One reason why roofing with metal takes longer is the extra step of laying plywood 4 or oriented strand board (OSB) under the metal. This additional step eliminates the added noise of metal. With proper installation, rain or even hail should sound no different inside a home with a metal roof than it does inside a home with an asphalt shingle roof.

Both of these jobs are best left to professional Albany roofing contractors. Working on a roof can be dangerous, and installing roofing materials is a very precise and demanding job. Areas around vents must be properly sealed, and flashing must be carefully put into place. Also, some warranties may be voided if the materials are not installed by a professional Albany area roofing contractor.

Costs

A metal roofing will cost approximately $265 to $600 per roofing square or $2 to $6 per square foot for steel or aluminum shingles, $120 to $150 for corrugated steel panels, and $700 to $900 for copper or zinc. After adding installation, a steel or aluminum roof will cost about $500 to $1,000 per square. For a home with a 1,500-square-foot roof, this comes to about $7,500 to $15,000. For a home with a 2,500-square-foot roof, this comes to $12,500 to $25,000. This is, on average, about three times the cost of asphalt shingles and is another reason many homeowners opt for an asphalt shingle roof instead.

Energy Efficiency

Asphalt shingle roofing is much less expensive at about $60 to $90 per roofing square for three-tab asphalt shingles or $100 to $120 per square for architectural shingles. Felt is installed under the shingles at $40 per roll of synthetic underlayment, at $85 per 400 square feet. Installation costs about $80 to $200 per square, and removal of a previous roof shingles adds about $80 to $150 per square. If architectural shingles are used, the labor rises to $200 to $400 per square. A highly pitched or steep roof will add even more to the installation cost. For a property with a 1,500-square-foot roof, the cost of a three-tab shingle roof comes to about $2,100 to $4,800 without the removal of the previous shingles, an additional $1,200 to $2,250. For properties with a 2,500-square-foot roof, the cost comes to between $3,500 and $8,000 without the removal of the previous shingles, an additional $2,000 to $3,750. These prices make asphalt shingle roofing an almost certain choice for first-time home buyers and contract builders. Newer fiberglass varieties can be even less expensive.

A metal roof will lower your energy bills by about 40 percent in the summer. The reflective surface lessens the transfer of heat into the home. On the other hand, asphalt shingles absorb the sun’s heat, transferring it through the roof to the home, making the home’s cooling system work harder. This is why asphalt shingles are recommended more strongly for temperate climates.

In winter, asphalt shingles perform better, using the heat absorbed from the winter sunlight to make the home much warmer. However, metal roofs also perform well in winter. The year-round energy usage will still be lower with metal than with asphalt.

Even so, some asphalt shingle styles are designated as cool roofs and join some metal roofs in carrying an Energy Star rating for higher energy efficiency. These roofing materials are certified to reflect more of the sun’s energy, lowering the roof’s temperature by up to 50 degrees Fahrenheit. Even though other factors can affect the amount of savings offered, they can decrease demand on the home’s cooling systems at peak times by 10 to 15 percent.

To offset the cost of installing a new roof, you can look for Energy Star certified asphalt shingles or metal roofs. When using these energy-efficient materials, 10 percent of the materials cost, up to $500, can be received as an energy credit.

Durability

The higher cost of metal roofing is also offset by its long-life expectancy. A metal roof can last for 60 years or more with little maintenance. Most roofing manufacturers offer a 50-year warranty on metal roofs. However, an asphalt roof will need to be replaced two or three times during that same 60-year period. Warranties for asphalt shingle roofs vary from 20 to 25 years.

Asphalt shingles are susceptible to hail and high wind damage, although fiberglass shingles are more durable than organic ones. Also, if asphalt shingles do not get adequate sunlight, they can accumulate mold, algae, or mildew. Metal roofs, on the other hand, are superior performers in high winds and bad weather, and they are impervious to molds, mildews, and bugs.

Metal roofs perform so well under harsh conditions that homeowners in over 25 states are eligible for insurance discounts when they install impact- and fire-resistant metal roofs.

If the metal roof is a low-quality steel without an adequate rust-resistant coating, then use near salt water is not advised. More expensive, rust-resistant metal alloys and coatings should be used instead.

Fire Resistance

Some manufacturers’ asphalt shingle lines are rated Class A for fire safety, especially the fiberglass varieties. Also, all metal roofs are fire resistant, steel and copper more so than aluminum. This makes metal roofing a good choice in areas prone to wildfires.

Recyclability

Metal roofing systems win the day regarding recycling issues. Some are made with recycled materials, and all are completely recyclable. About 1 million tons of asphalt shingles are disposed of each year, and they can be recycled into a variety of products. The cost to recycle them is generally less than to place them in landfills. However, available recyclers for asphalt shingles are few, but the development of more recycling availability is underway.

Maintenance

Repairs are more difficult with metal roofing since most of the metal used is made in sheets and must be replaced that way. When damage occurs to a roof, asphalt is easier and less expensive to repair or replace. Metal roofs require little maintenance and need to be repaired far less frequently.

Resale Value

Because a metal roof is strong, durable, and energy efficient, it should increase a home’s resale value. By some estimations, the resale value will increase by 1 to 6 percent over a house with asphalt shingles. The buyer must appreciate the look of a metal roof, however. Any new roof will help sell a home since buyers want to feel secure about the condition of the roof over their heads.

Infinite Roofing and Construction are the Albany roofing contractors of choice, whether you are going for a metal roofing installation or an asphalt shingle roofing installation. We are experienced in both residential and commercial roofing installations of any type and can best advise you on the best materials for your property. Call us today for a free consultation on 518-444-ROOF (7663).

Is your roof leaking? Could the ridge vent be the problem?

June 21, 2019 by Infinite Roofing Leave a Comment

Do you have a roof leak and can’t figure out what the problem may be? Don’t assume that a faulty roof or the shingles may be the problem and that you may need a full roof replacement. Faulty ridge vents can contribute to the problem and can lead to moisture issues. Fixing a leak quickly is important because if not fixed it can cause more problems down the line.

What are ridge vents?

You may wonder what exactly is a ridge vent and where does it fall in the equation of a roof leaking?

Ridge vents are critical to the attics health, they are a part of the attics ventilation system and helps circulate the air. They also usher moisture (in winter and summer) and hot air (during the summer) that would otherwise lead to damage. It is a metal capping that allows hot air to escape from the attic, the ventilation allows the attic to stay dry, free from any moisture and also prevents it from damaging your insulation. When getting a roof installation a ridge vent will be the last thing that will be placed on the structure and for that reason, a ridge vent leak can occur. Many time the fasteners that are used for the ridge vent aren’t secured properly

Inspect the Attic

Go up to the attic during daylight. Keep the lights off and look up at the roof to see if there is any light coming through. Diffused light is normal, but a beam of light may be the cause of a leak. Then, use a flashlight to examine the ridge vent. Look for moisture or water stains. Water stains may be from an old leak.

Another good time to inspect the attic is when it is raining. Be sure to notice where the water is coming from, because it may be channeled from another area on the roof before dripping down into the attic.

Air Circulation Problems

If you don’t see any leaks, you may have a one-time problem with rain or snow being blown in by heavy winds. Another problem can be a lack of ventilation in the attic. If the air is not circulated, you may get a problem with condensation, which mimics a roof leak.

Most Albany roofing contractor recommends that a roof should be inspected at least ones a year to prevent a ridge vent problem from creating bigger trouble and more damage than it would if it was to be. A strong gust of wind can pop up the ridge vent cap and if not taken care of immediately as rain, snow and even ice dams can cause your roof to leak. The process if inspecting the roof can be done by the homeowner or a professional

Repairing leaking ridge vents

Avoiding problems with ridge vents leak is easy when you schedule an annual roof inspection. During the evaluation, the Albany roofing contractor will not only assess the condition of the ridge vents, but he will also identify issues with shingle wear, damaged flashing and more.

If you feel that crawling around on your roof is a risky and perhaps dangerous job; you are exactly right. There are professionals that will inspect your roof and look for a ridge vent leak for only a minimal cost. These professionals will inspect various other common problems that may occur, as well.

Let the professionals do their job and call Infinite Roofing for an inspection to make sure that there is no ridge vent problem with your roof!

DIY method to remove Moss and Lichen With Vinegar

June 17, 2019 by Infinite Roofing 18 Comments

Damp conditions are perfect for mosses and lichens to grow, lichen consists of a fungus and photosynthesizing plant, while moss itself is a plant. When materials like leaves collect on your roof, a perfect bed is formed for moss and lichens to grow. People try finding ways to remove moss and lichens themselves without having to hire roofing contractors and there are ways to take care of that problem yourself and also do it in an environmentally friendly way. You can remove moss and lichens from your roof by using vinegar as an environmentally friendly weed killer. Roof cleaning is an important aspect of having your house look new and not aged. Algae and moss on roofs adds years to the look of your house, removal of algae will bring newly replaced roof look and make your house stand out.

Step 1

Ensure to clean up any organic matter on the roof such as leaves, twigs or other debris. Organic material is a perfect growing ground for moss and lichen, not only that it can also rot and possibly damage your roof.

Step 2

Use a push broom, or other sorts of stiff brush, to scrape away any stubborn mold or lichen patches still remaining. Begin with the top of the roof and work your way toward the eaves. For your safety stay well away from the edge of the roof.

Step 3

Use a tall ladder, and set it up next to the house. Get rid of any moss around the roof edges using the brush. Repeat this step and work your way around the house to make sure all sides are covered. If ever any step seems like they may be too dangerous for you to perform yourself, roofing companies always offer cleaning services and professional roofing contractors can always inspect your roof while cleaning.

Step 4

Take a bucket and pour distilled white vinegar into it. The vinegar should be labeled with its acetic acid strength, which shouldn’t be more than 5 percent. To help the vinegar cling to moss and lichens add a 1 oz. of dish soap, and finally pour the mixture into the spray bottle.

Step 5

Use the spray bottle and apply the vinegar to the moss and lichens on the roof, then get off the roof and apply the vinegar to the moss and lichens around the edge.

Step 6

This is where the waiting game begins, it generally takes a couple of days for the vinegar to kill off the moss and lichens.

Step 7

Use the brush that was used earlier to remove the dead lichens and moss.

Step 8

The final step is to clean the roof is to use a garden hose or sprayer to rinse off everything.

An option to consider when trying to avoid problems related to moss and algae on the roof would be to consider the GAF StainGuard technology. When your roof has run its life and it’s time to replace the roof, talk to your local Albany roofing contractors about the possibility of having the GAF Timberline shingles that have the stain guard technology, or the GAF Ultra shingles that have the StainGuard plus technology installed.

Blue-green algae, also known as Gloeocapsa magma, has spread throughout more than 80% of the U.S., leaving dark black stains wherever it grows, and making millions of perfectly good roofs, and the homes they protect look old before their time.

Many traditional algae-resistant shingles use a granule technology developed more than a quarter-century ago. There is a layer of algae-fighting copper in the granules that is released onto the roof when it’s wet. Granules get older as the roof ages, and it releases less and less copper, affecting and reducing the shingle’s algae resistance.

StainGuard Plus™ Time-Release technology from GAF releases algae-fighting copper more efficiently, over time, for long-lasting algae-fighting power.

Unlike the older layered technology, StainGuard Plus™ technology uses specially engineered capsules, that are infused throughout with thousands of copper microsites so copper remains within reach, ready to be activated in the battle against blue-green algae stains.

StainGuard Plus™ uses a time-release technology, its algae resistance so powerful, it comes with a 25-year ltd. warranty against blue-green algae discoloration.

Roofing companies offer GAF products with the warranties in Albany, we at Infinite Roofing and Construction pride ourselves for our GAF certification and the knowledge to sell you the right product, with the correct installation so you as a consumer can get all the benefits provided by the GAF StainGuard technology for the protection it guarantees for your roof.

Moss and lichen are an easy problem to solve, but why not prevent the problem altogether by getting the right material for your roof that would prevent the growth of moss and protect your roof throughout the years.

Looking for a roof that would last years and also be Eco-Friendly?

June 12, 2019 by Infinite Roofing Leave a Comment

Shingles have to be replaced by the homeowners at some point in a roofs lifetime. Conventional asphalt shingle roofs last about 20 years if you are lucky because they are constantly exposed to sunlight, heat, cold, rain, wind, and sometimes snow, sleet, and hail.

If you’d like a roof that will outlast a conventional asphalt shingle roof and is made from eco-friendly roofing materials, consider the products outlined here. Many of them are virtually immune to hail. Green roofing products are many and varied, ranging from recycled-plastic shingles to recycled-metal roofs to sustainably harvested or reclaimed wood roofs to having plants grow on your roof. The best option for your home depends on the design of your home, local building codes, and price considerations.

Recycled Shingles

The most popular and perhaps the most environmentally friendly option would be shingles made from recycled waste materials, such as plastic, rubber, or wood fiber. Some products are made from clean post-consumer waste (waste from homes), others from post-industrial waste (factory waste). Recycled-content shingles are amazingly durable, and they look amazing, too. You’d never be able to guess they were made from “waste” materials!

Waste from landfills are reduced by recycled-content roof shingles help our need to extract and process raw materials, which reduced pollution and lowers energy consumption. Some of these products are recyclable, too, and many come with amazing 50-year warranties. A few even carry fire ratings that could lower your insurance rates.

A popular choice throughout the country has been wood shingles and shakes for homeowners and roofing contractors. Unfortunately, conventional wood shingles are made from old-growth western cedar. Although the amount of energy it takes to produce this product is relatively low, the harvest of old-growth trees is not sustainable in the long run. These shingles are also quite combustible and can no longer be used in areas where there is a risk of brush and forest fires.

If you are still considering installing wood shingles try considering shingle made from reclaimed lumber. Reclaimed lumber products are made from old bridges, mills, old water, and wine tank and other sources.

Slate and Clay Tiles

Slate produces an extremely durable tile, one that can last hundreds of years, and is also an all natural material. It is, however, an energy-intensive process to mine the slate tiles, but most companies salvage slate and clay tiles. Roofing contractors are very familiar with slate roofing as that is getting increasingly popular, the install cost may be a little pricey, but with that being said your roof will last twice as long with barely and repairs to be done.

Metal Roofing

Many metal roofing products include at least some recycled material, but one advantage of metal roofing is that it can be recycled at the end of its life. Because metal roofs can last up to 50 years, roof replacement is less frequent, which means less waste in the long run. They offer exceptional durability and fire-resistance, and they’re ideal for those who want to collect rainwater from their roofs to water gardens (or for household uses). You don’t have to worry about chemicals that might leach from a conventional asphalt roof. Standing-seam metal roofs work nicely as the base for thin-film photovoltaic panels, too.

Metal roofs are great in snowy climates because they allow snow to slide off, which prevents ice dams from forming. (Ice dams can damage roofs of improperly insulated homes.) To protect walkways from snow sliding off the roof, you’ll need to install snow bars or a similar device over walkways, garage doors, and entryways. Although other eco-friendly roofing options may not always be available at every local roofing company or roofing contractors may not be trained to handle the installation of those specific roofs, metal roofing on the other hand is extremely popular and the popularity is growing so most if not all roofing contractors know the inside outs of installing a metal roof.

Rubber Roofing

Another recycled roof material is reinforced rubber shingles made from old steel-belted radial tires. The material is coated with ground slate for texture and comes in a variety of colors. A big advantage to this material is a long life and a 50-year warranty, including against hail and other extreme weather. The only downside to rubber roofing is that it is not always allowed in all counties. Make sure with your local roofing company and the building department that rubber roofing is allowed to be installed on your house.

Green Roofing

A green roof is a roofing system that is an addition to the existing roof and add flora to it. Depending on the green roof type that you plan on installing the plants may be modular or have a drainage system to it.

There are many different reasons as to why a homeowner of a business owner would want to get a green roof. The installation of a green roof reduces the need to manage any stormwater that accumulates, as well as the stress put on local sewer systems. The plants would also help prevent the distribution of smog and would catch any pollutants in the air.

Having an eco-friendly roof not only helps the environment but also as a homeowner, your roof life will last longer preventing the replacement costs. Contact your local roofing contractor today to discuss the options of eco- friendly roofing and how that may benefit you.